Rowenta X-Plorer Serie 70 RR8497 handleiding

Niet gecategoriseerd

Rowenta

128 pagina's

PDF beschikbaar

Handleiding

10 11

Flash the QR-Code above to know how to install and connect the robot in video.

You

canalsondthedetailedpairinginstructionsstepbystepinaPDFdocumentby

ashingtheQR-Codebelow.

Flash the QR-Code above to know how to use the main features of the application in

video.

Use the main app features

Connect the robot with the free app

Pressthebutton“Power”tostartautomaticcleaning.Therobotwillscanthearea.It

willautomaticallysplittheroomintosmallzones,rstcleanszoneedgesandthen

cleansinsidethezoneinazigzag.Therobotwillcleanallaccessiblearea,zoneby

zone. Press the button “Power” at any time to pause cleaning and press it again to

resumecleaning.Iftherobotisonstandby,pressthebutton“Power”oncetowakeup

therobotandasecondtimetostartcleaning.

If you start the robot from the station, it will automatically return to its station at the end

thecleaningsessionorifthebatterylevelistoolow.Ifthebatteryrunslowduring

the cleaning session, the robot will automatically return to its station to charge. After

charging,therobotwillresumecleaningwhereitleftoff.

therobotisnotonitsstationwhenitstartscleaning,itwillautomaticallyreturntoits

startingpointattheendofthecleaningsessionorifbatterylevelistoolow.

If the robot doesn’t start when you press the button “Power”, the battery level may be

toolow,pleasechargetherobot.

At the end of the cleaning session, the robot will automatically return to the station.

Butifyouwanttomanuallyendthecleaningsession,pressthe“Home”buttononceto

stop the robot at any time and press it again to send the robot back to the station. If the

robotfailstondthestation,manuallyplacetherobotinfrontofthestationandpress

the“Home”button.Oncetherobotisdocked,thedustcollectionwillbeautomatically

activated for few seconds. Please note that the minimum time interval between two

dust collections is 5 minutes.

Use the robot without the app

Bekijk gratis de handleiding van Rowenta X-Plorer Serie 70 RR8497, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.