Rowenta X-Plorer Serie 220 RR9495 Handleiding (137 Pagina's)

Handleiding

18 19

Maintain the robot and its accessories

24h

EN

Once a week, clean the lter

Always switch off the robot by pressing and holding the START button for 5 seconds,

and unplug the station before any manipulation.

Take the cleaning tool located on top of the dust box. Remove the lter from the dust

box by grabbing the center part of the lter holder. Use the brush part of the cleaning

to clean the lter. You can also wash the lter and the dust box under water. Let them

out to dry for 24 hours. Put the lter back to its original place. Replace the cleaning

tool on top of the dust box. Reinstall the dust box in the robot by grabbing the dust box

handle. Warning: do not reinstall the dust box in the robot without grabbing the dust

box handle, it will not be correctly installed and the robot will not start. Note: Never use

the robot without the pleated lter. It would damage the robot.

Maintain the robot and its accessories

Once a week, clean the main brush

Always switch off the robot by pressing and holding the START button for 5 seconds,

and unplug the station before any manipulation.

Turn the robot upside down. Press the latches of the brush cover and pull to remove

it. Take out the brush. Pull the brush heads on the left and right sides of the brush to

remove them and get rid of tangled hair. Take the cleaning tool and use the blade part

to cut off the tangled hair. Replace the brush heads before re-installing the brush in the

robot. Re-install the brush cover. The cover is correctly installed when you hear a click

sound.

CLICK

EN

Bekijk gratis de handleiding van Rowenta X-Plorer Serie 220 RR9495, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.