Rowenta X-Plorer Serie 140+ RR9197 handleiding

Niet gecategoriseerd

Rowenta

128 pagina's

PDF beschikbaar

Handleiding

8 9

Install the robot

InstalltheAutomaticDustCollectingStationonahardandatoor.Avoidparquet,

woodenoorsandcarpet.Placethestationinaclearspaceagainstawall,withno

stairsinfrontofthestation.Keepatleast0.5mofclearanceoneithersideand1.5min

front. Make sure the chosen location is close to the Wi-Fi box or has good Wi-Fi signal

strength.Keeptheareaaroundthestationclearfromanyobject,reectivesurface,

mirror, table and chair. Keep the station away from direct sunlight. Plug the “power”

cable. Make sure the “power” cable remains against the wall.

Turntherobotonbypressingandholdingthe“Power”buttonuntiltherobotlightsturnon

(~5 seconds). Place the robot from 20 to 50 cm in front of the station. Press the “Home” button,

the robot will automatically dock to the station. (Do not manually place the robot against

the station). Once the robot is docked, the dust collection will be automatically activated for

few seconds. Please note that the minimum time interval between two dust collections is

5minutes.Wait4hoursfortherobottobefullycharged.Thestationlightisoffwhentherobot

ischarging.Fortherst-timecleaning,pleaseensurethattherobotisfullycharged.Therobot

isfullychargedwhenthewhiteindicatorsontherobotarenormallyseton.Forthersttime

use, the robot will explore the environment and clean your home at the same time. Once it is

done, the robot will come back where it started and the map of your home will be displayed on

yourapp.Donotlifttherobotduringtherstcleaning,itpreventsthemapcreation.

If you have carpets with fringes, please place barriers around carpets to prevent the robot

from getting stuck in the fringes.

If you have an outdoor area (garden, balcony, patio, etc.) accessible with a threshold less

than 2 cm high or without threshold (for example with a French window, a patio door, a bay

window, etc.), please close this access to the robot.

1.5m

0.5m

sec

AUTO

Flash the QR-Code above to know how to install and connect the robot in video. Read

the following instructions for more detailed informations.

Removeallprotections(protectivelmsandplasticfoamprotection)onthestation

andontherobot.Reversetherobot,installthesidebrushbygentlyclippingit.Theside

brush is correctly installed when you hear a “click” sound.

Install the robot

CLICK

Bekijk gratis de handleiding van Rowenta X-Plorer Serie 140+ RR9197, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.