Rothenberger RODIA DRY CLEANER 1200 handleiding

Niet gecategoriseerd

Rothenberger

60 pagina's

PDF beschikbaar

Handleiding

18 ENGLISH

3.2 Indicator and operating elements

Select from the following functions and settings:

Vacuum cleaner is switched

off

Plug socket current-conducting

Vacuum cleaner is running

Plug socket current-conducting,

Automatic shaker function off

Ready mode for ON/OFF

automatic mode

Plug socket curren-conducting,

The vacuum cleaner is switched on and off via the con-

nected electrical/compressed air tool at the plug socket

Filter cleaning function

In this switch setting the vibrator is activated for approx.

10 sec. and then switches off again automatically

Ready mode for ON/OFF

automatic mode

Ready mode like “A” plus automatic filter cleaning

Automatic shaker function

Filter cleaning is performed (switch setting RA) automati-

cally during the next working break when the minimum

volume flow level is reached

Fill level indicator

When the container is full and/or there is a blockage in the

suction hose, the full indicator lights up

3.3 Commissioning

Switching on and off Electric tools:

The plug socket on the vacuum cleaner will always be live when the mains plug is plugged in, ir-

respectively of the position of the switch.

Electric tools and compressed air tools must be switched off when they are connected!

Note: If the switch is in the >0< position, the plug socket on the vacuum cleaner can be use as

an extension lead. Connection value: Vacuum cleaner + connected unit,maximum 16 A.

 Insert the plug into socket

>0<

Vacuum cleaner is switched off

>I<

Vacuum cleaner switched on without shaker function

>A<

Vacuum cleaner on standby The vacuum cleaner only switches on when the tool is

switched on. After the tool is switched off, the vacuum cleaner runs on for approx. 10

sec to prevent any residue from collecting in the hose.

>R<

Filter cleaning function

>RA<

Ready mode like >A< plus automatic filter cleaning

 Set the vacuum cleaner to the switch position >0<

 Pull out the plug after you have finished

 Fix the suction hose in the accessory storage location on the back of the container for stor-

age.

 The ends of the hose can be pushed into each other to prevent particles of dirt from coming

out.

Switching on and off vacuum cleaner:

 Push the plug of the vacuum cleaner into the plug socket.

 Set the desired operating mode on the switch. The vacuum cleaner is ready for suction.

 After vacuum cleaning, set the switch to „O“. The vacuum cleaner is switched off.

 Pull the mains plug of the vacuum cleaner out of the plug socket.

 Secure the mains cable.

 Remove the electric/compressed air tool.

Bekijk gratis de handleiding van Rothenberger RODIA DRY CLEANER 1200, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.