Rothenberger ROBEND 4000 E handleiding
Handleiding
Je bekijkt pagina 26 van 268
20
ENGLISH
Charger:
Repairs to the charger must only be carried out by qualified electricians.
If the mains connection cable of this tool is damaged, in order to prevent endangering personnel
and property it must be replaced by the manufacturer, or the Customer Service of the manufac-
turer, or a similarly qualified person.
6 Troubleshooting
Symptom Possible Reason Solution
The bending former stops
rotation during bending,
while the motor is still run-
ning
The direction lever is not in
the right position
There is a transmission
problem - contact your
technical service centre
Bends are not round/circular
Bending former and/or shoe
are not suited to the tube
size.
Bending former and/or shoe
are worn out.
Tube quality is suspect
The ROBEND 4000 E does
not start
Check the wiring in the plug.
Carbon brushes may be
worn out and need replacing
Pre-set trigger does not
function
Screws are not tightened
properly
7 Accessories
You can find suitable accessories in the main catalog or at www.rothenberger.com
8 Customer service
The ROTHENBERGER service locations are available to help you (see listing in catalog or on-
line) and replacement parts and service are also available through these same service locations.
Order your accessories and spare parts from your specialist retailer or using RO SERVICE+
online: ℡ + 49 (0) 61 95/ 800 8200 + 49 (0) 61 95/ 800 7491 service@rothenberger.com -
www.rothenberger.com
9 Disposal
Components of the unit are recyclable material and should be put to recycling. For this purpose
registered and certified recycling companies are available. For an environmental friendly dispos-
al of the non-recyclable parts (e.g. electronic waste) please contact your local waste disposal
authority.
Old batteries can be taken to your specialist dealer who will dispose of them in conformity with
environmental regulations.
For EU countries only:
Do not dispose of electric tools with domestic waste. In accordance with European
Directive 2012/19/EU on waste electrical and electronic equipment and its implementa-
tion as national law, electric tools that are no longer serviceable must be collected
separately and utilised for environmentally compatible recycling.
Bekijk gratis de handleiding van Rothenberger ROBEND 4000 E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Rothenberger |
| Model | ROBEND 4000 E |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 33257 MB |
