Roland V-1600HD handleiding
Handleiding
Je bekijkt pagina 20 van 68
20
Connecting External Equipment
Connect video cameras or other equipment providing HD component output to the Y/Pb/Pr connectors in RGB/COMPONENT IN.
Component input is assigned to channels 9 through 12.
Component input and output on the V-1600HD is exclusively Y/Pb/Pr. Y/R-Y/B-Y cannot be input or output.
For channels 9 and 10, you can make the connection directly via the three BNC connectors. Connection for channels 11 and 12 requires a BNC to
D-Sub 15-pin conversion cable.
fig.component-connection.eps
Connect the external output of the computer to the RGB/COMPONENT IN connectors. This is assigned to channels 11 and 12.
* When you’re connecting a desktop computer, connect the display monitor to the THRU connector and set the TERMINATOR switch to [OFF].
* For information on the resolutions and refresh rates that can be input, refer to “Main Specifications” (p. 47).
For channels 11 and 12, you can make the connection directly via the D-Sub 15-pin connector. Connection for channels 9 and 10 requires a D-Sub
15-pin to BNC conversion cable.
Use cables with ferrite cores when you connect computers to the V-1600HD.
fig.PC-connection-RGB.eps
Connecting HD Analog Video Equipment (Component)
Connecting a Computer (RGB)
Bekijk gratis de handleiding van Roland V-1600HD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Roland |
| Model | V-1600HD |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9574 MB |
