Roland V-1600HD handleiding
Handleiding
Je bekijkt pagina 11 van 68
11
Turning the Power On and Off
Once the connections have been completed (p. 9), turn on power to your various devices in the order specified. By turning on
devices in the wrong order, you risk causing malfunction and/or damage to monitors or other devices.
* This unit is equipped with a protection circuit. A brief interval (a few seconds) after power up is required before the unit will operate normally.
1. Connect the peripheral devices.
Connect video cameras or other equipment. Make the connections while the power to all equipment, including the V-1600HD, is
turned off.
2. Turn on the power to the V-1600HD.
Set the POWER switch on the rear panel to ON to turn on the power to the V-1600HD.
fig.power-on.eps
3. Turn on the power to the peripheral devices.
Turn on the power to the peripheral devices connected to the V-1600HD.
1. Turn off the power to the peripheral devices.
Turn off the power to the devices connected to the V-1600HD.
2. Turn off the power to the V-1600HD.
Set the POWER switch on the rear panel to OFF to turn off the power to the V-1600HD.
Turning the Power On
Turning the Power Off
Bekijk gratis de handleiding van Roland V-1600HD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Roland |
| Model | V-1600HD |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9574 MB |
