Roland TR-1000 handleiding
Handleiding
Je bekijkt pagina 28 van 36
28
Useful functions
Using morphing (MORPH)
Smoothly changing between two sounds
(KNOB MORPH)
This feature lets you use just the [MORPH] slider to move multiple
knobs at the same time. This makes it possible to smoothly change
between dierent sounds.
Select parameters across multiple tracks, and set the value that
applies when the slider is moved left or right.
This set of saved values can be saved in 16 morph slots.
The MORPH data is saved in the kit.
Ø “Saving various settings (WRITE)” (p. 27)
1. Hold down the [SHIFT] button and press the
[MORPH] button.
The MORPH screen appears.
2. Press the step keys [1]–[16] to select the morph slot
to set.
3. Turn the knobs in the Eect controlling section and
the Instrument controlling section to set the values
of the parameters that you want to save to the
morph slot.
4. Press the [EXIT] button.
This exits the MORPH screen.
MEMO
If the [MORPH] button is blinking, press the [MORPH] button to
turn on the morph function.
5. Move the [MORPH] slider.
Making a specic step play back in a loop
(STEP LOOP)
You can make a selected step or steps play back in a loop during
pattern playback.
1. Press the [START] key to play back the pattern.
2. Press the [STEP LOOP] button.
The [STEP LOOP] button blinks, and the unit enters step loop
mode.
3. Press the step key [1]–[16] corresponding to the
step that you want to play back in a loop.
The selected step starts playing back in a loop.
When you release the step keys [1]–[16], the system returns to
playing the pattern.
MEMO
To exit the step loop mode, press the [STEP LOOP] button.
Muting a track (MUTE)
This mutes (silences) the selected track.
1. Press the [MUTE] button so it’s lit.
2. Press the track select [BD]–[RC] buttons to select
the track to mute.
The select button for the muted track blinks.
When you press the track select [BD]–[RC] buttons again, the
buttons light up and the track is unmuted.
MEMO
If you want to unmute all the muted tracks, hold down the [MUTE]
button and press the [CLEAR] button.
Changing the tempo
1. Press the [TEMPO] button.
The TEMPO SETTING screen appears.
2. Use the [C2] knob to change the tempo.
Use the [C3/SCROLL] knob to adjust the tempo in units of 0.01.
3. Use the [C1] knob to adjust the shue (swing).
Tap tempo
You can input the tempo by tapping.
1. Holding down the [SHIFT] button and press the
[TEMPO] button three or more times.
The tempo that’s set is the average of the timing with which you
tap the [TEMPO] button.
Bekijk gratis de handleiding van Roland TR-1000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Roland |
| Model | TR-1000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5438 MB |
