Roland TR-1000 handleiding
Handleiding
Je bekijkt pagina 17 van 36
17
Inputting steps
Create your pattern by specifying the steps on which sound plays
for each track. You can also create your pattern while listening to the
pattern play back.
* If you want to keep the content of the pattern or the kit you’ve
edited, save the pattern or kit before turning o the power (p.
27).
1. Press the [TR-REC] button.
2. Press the variation [A]–[H] buttons to select a
variation from A to H.
3. Press the track select [BD]–[RC] buttons to select
the track on which to record.
4. Press the step keys [1]–[16] to enter the steps for
which you want a sound to play.
When doing this, the BD–HT layer tracks play the layer A/B
generator simultaneously, and the single track RS–RC plays a
single generator.
Inputting sub-steps
You can sub-divide a step and input sub steps within it.
1. Press the [SUB] button.
2. Press the step keys [1]–[16] to enter the steps.
MEMO
Turn the [C6/VALUE] knob while holding down the [SUB] button
to select the number of divisions.
Inputting weak beats
1. Press the step keys [1]–[16] while holding down the
[SHIFT] button.
Inputting layer A/B separately
You can enter steps for each layer separately in the BD–HT layer
tracks.
1. Press the step keys [1]–[16] while holding down
either the LAYER [A] or [B] button.
MEMO
After pressing the [AMP] button, you can use the [÷] [ø] buttons
to check the levels and balance between the layers.
Inputting alternate sounds (ALT INST)
You can input alternate sounds for the single track RS–RC.
* Alternate sounds contain a “-” character (example: 707Bass1-2) in
their name.
1. Press the step keys [1]–[16] while holding down the
LAYER [B] button.
Erasing a recorded step from a track
(CLEAR)
1. Press the track select [BD]–[RC] buttons while
holding down the [CLEAR] button to select the
track that contains the steps you wish to erase.
MEMO
Press the [CLEAR] button while holding down the [SHIFT] button
to erase the steps that play back.
Editing the steps
1. Use the [C1]–[C5] knobs while holding down the
step keys [1]–[16] to edit the steps.
Parameter Explanation
VELOCITY Sets the strength of the accent.
START Sets how much to shift the timing of the note.
SUBSTEP
Divides the steps into sub-steps for creating rolls or
repeated strokes.
For instance, when this is set to “1/2”, one step plays
twice.
PROB
Sets the probability for the step to play back. The
smaller the number, the less frequently the step plays.
CYCLE Sets how many cycles over which the sound plays.
Ø For details on the parameter’s value, refer to the “Reference Manual”
(Roland website).
2. Release your nger from the step keys [1]–[16].
This exits the STEP EDIT screen.
Creating a pattern with step recording (TR-REC)
Bekijk gratis de handleiding van Roland TR-1000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Roland |
| Model | TR-1000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5438 MB |
