Roland TR-1000 handleiding
Handleiding
Je bekijkt pagina 15 van 36
15
Selecting a pattern
1. Press the [PTN SELECT] button.
2. Use the step keys [1]–[16] to select a pattern.
The step key you selected blinks.
MEMO
You can also select a bank rst, then select a pattern.
Follow the steps below to select a bank.
1. Press a step key [1]–[8] while holding down the
[PTN SELECT] button to select a bank.
MEMO
You can also use the [C6/VALUE] knob to select the pattern and
bank.
Playing back a pattern
1. Press the [START] key.
This plays back the pattern. The respective button lights up during
playback.
When you select the next pattern during playback, the step keys
blink.
Once the current pattern nishes playing, the next pattern starts
playing.
You can press the two step keys at the same time to select
multiple patterns.
The selected patterns play in sequence.
2. Use the controllers in the Instrument controlling
section to change the sound.
MEMO
If you press the [START] key while holding down the [SHIFT]
button, the pattern that’s playing back goes back to the
beginning.
Stopping a pattern
1. Press the [STOP/CONT] key.
MEMO
When you press the [STOP/CONT] key again, the pattern plays
back from where it stopped.
Press the [START] key to play back from the beginning of the
pattern.
Erasing a pattern
1. Press the [PTN SELECT] button.
2. Hold down the [CLEAR] button and press the step
keys [1]–[16] to select the pattern you want to
erase.
Selecting and playing back each variation
one at a time
1. Press the variation [A]–[H] buttons to select the
variation you want to play.
2. Press the [START] key.
The variation plays. The respective button lights up during
playback.
Once the current variation nishes playing, the next variation
starts playing.
* If you press the variation [A]–[H] buttons while holding down the
[TR-REC] button, you can edit the variation corresponding to the
button you press without changing the variations that are playing
back.
Linking multiple variations and playing
them in sequence (VARIATION CHAIN)
You can play back multiple variations in sequence, one at a time.
1. Press the variation [A]–[H] buttons at the same time
to select the variations you want to link (chain)
together for playback.
2. Press the [START] key.
Chain playback starts and the [VARI CHAIN] button lights up.
* If you press the variation [A]–[H] buttons included in the chain
while holding down the [TR-REC] button, you can edit the
variation corresponding to the button you press while the chain
plays back.
* If you press a variation [A]–[H] button that is not included in the
chain, the variation of the button that you pressed starts playing
back.
Then, press the variation [A]–[H] buttons in the chain to play back
the chain.
You can store one set of variation playback settings per pattern.
On the WRITE screen, you can save these settings for the variations
to be played back in the pattern.
Canceling the variation chain
1. Press the lit [VARI CHAIN] button.
This cancels the chain, and the [VARI CHAIN] button goes dark.
* If you cancel the chain while it’s playing, the unit switches to
playing back one variation repeatedly.
This erases the stored chain information.
Playing back a pattern
Bekijk gratis de handleiding van Roland TR-1000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Roland |
| Model | TR-1000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5438 MB |
