Roland S-4000-SP handleiding
Handleiding
Je bekijkt pagina 5 van 16
5
IMPORTANT NOTES
In addition to the items listed under “IMPORTANT SAFETY INSTRUCTIONS” and “USING THE UNIT SAFELY” on pages 2
and 3–4, please read and observe the following:
Power Supply
301
• Do not connect this unit to the same electrical outlet that is
being used by an electrical appliance that is controlled by
an inverter (such as a refrigerator, washing machine,
microwave oven, or air conditioner), or that contains a
motor. Depending on the way in which the electrical
appliance is used, power supply noise may cause this unit
to malfunction or may produce audible noise. If it is not
practical to use a separate electrical outlet, connect a
power supply noise filter between this unit and the
electrical outlet.
307
• Before connecting this unit to other devices, turn off the
power to all units. This will help prevent malfunctions
and/or damage to speakers or other devices.
308
• This devices has no power switch. Disconnect the plug
from the power outlet whenever shutdown of power is
required. The power cord’s plug should be connected to
the closest available power outlet to the device; this
should be within immediate reach during use.
Placement
352a
• This device may interfere with radio and television
reception. Do not use this device in the vicinity of such
receivers.
352b
• Noise may be produced if wireless communications
devices, such as cell phones, are operated in the vicinity of
this unit. Such noise could occur when receiving or
initiating a call, or while conversing. Should you
experience such problems, you should relocate such
wireless devices so they are at a greater distance from this
unit, or switch them off.
355b
• When moved from one location to another where the
temperature and/or humidity is very different, water
droplets (condensation) may form inside the unit. Damage
or malfunction may result if you attempt to use the unit in
this condition. Therefore, before using the unit, you must
allow it to stand for several hours, until the condensation
has completely evaporated.
360
• Depending on the material and temperature of the surface
on which you place the unit, its rubber feet may discolor
or mar the surface.
You can place a piece of felt or cloth under the rubber feet
to prevent this from happening. If you do so, please make
sure that the unit will not slip or move accidentally.
Maintenance
401a
• For everyday cleaning wipe the unit with a soft, dry cloth
or one that has been slightly dampened with water. To
remove stubborn dirt, use a cloth impregnated with a
mild, non-abrasive detergent. Afterwards, be sure to wipe
the unit thoroughly with a soft, dry cloth.
402
• Never use benzine, thinners, alcohol or solvents of any
kind, to avoid the possibility of discoloration and/or
deformation.
Additional Precautions
553
• Use a reasonable amount of care when using the unit’s
buttons, sliders, or other controls; and when using its jacks
and connectors. Rough handling can lead to malfunctions.
556
• When connecting / disconnecting all cables, grasp the
connector itself—never pull on the cable. This way you
will avoid causing shorts, or damage to the cable’s
internal elements.
557
• A small amount of heat will radiate from the unit during
normal operation.
558b
• To avoid disturbing your neighbors, try to keep the unit’s
volume at reasonable levels (especially when it is late at
night).
559a
• When you need to transport the unit, package it in the box
(including padding) that it came in, if possible. Otherwise,
you will need to use equivalent packaging materials.
add
• This product is a Class A digital device for use in other
than residential environment. Use of this equipment in a
residential environment may cause radio interference
requiring the user to take appropriate preventative
measures. In such instances, take steps such as using
cables with ferrite core connectors.
For information on specific preventive methods, contact
your dealer, the nearest Roland Service Center, or an
authorized Roland distributor, as listed on the
“Information” page.
add
• This product is a Class A digital device designed to be
used in a non-residential environment. When this device
is connected to a digital snake or other such Class B
equipment, the system as a whole is then classified as a
Class A device. Use of this equipment in a residential
environment may cause radio interference requiring the
user to take appropriate preventive measures.
In such instances, take steps such as using cables with
ferrite cores near their connectors.
For information on specific preventive methods, contact
your dealer, the nearest Roland Service Center, or an
authorized Roland distributor, as listed on the
“Information” page.
S-4000-SP_e.book 5 ページ ２００６年８月２４日 木曜日 午前１０時３３分
Bekijk gratis de handleiding van Roland S-4000-SP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Roland |
| Model | S-4000-SP |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1895 MB |
