Roland S-4000-SP handleiding
Handleiding
Je bekijkt pagina 12 van 16
12
Notes to Observe in Using the S-4000 System
The REAC cables used in digital snake systems employ computer network
technology to enable transmission of multichannel audio signals.
In very rare cases, however, noise may be generated when these systems are used in
certain environments. If noise is present, check the following points.
As REAC cables use computer network technology, you should pay attention to the
following points regarding wiring with network cables.
• Ensure that cables used for REAC connections conform to the Cat5e (Ethernet
Category 5) standard.
• No single cable should be longer than 100 meters.
• Do not use cables with cut or torn coverings.
• Do not subject cables to undue stress.
• Do not wind or bend cables such that the radius of the turn is 25 mm or less, and do
not double cables over.
• Do not bind cables tightly into bundles.
If you are making your own REAC cables, note the following precautions in addition
to those above.
• Use plugs (RJ-45) conforming to high reliability standards.
• Do not separate the wires (twisted pairs) within the cables.
Use and Handling of REAC Systems
About REAC Cables
Notes to Observe When Producing REAC Cables
S-4000-SP_e.book 12 ページ ２００６年８月２４日 木曜日 午前１０時３３分
Bekijk gratis de handleiding van Roland S-4000-SP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Roland |
| Model | S-4000-SP |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1895 MB |
