Roland S-2416 handleiding
Handleiding
Je bekijkt pagina 8 van 28
8
Panel Descriptions
Front Panel
1
2
7
10
8
11
9
3 4 5 6
No. Name Explanation
1
INPUT connector
Various input devices are connected to these. The inputs include a variable-gain preamp that can accept signals
from -65 through +10 dBu (nominal, maximum input: +28 dBu).
The status of the connectors is displayed on 3 indicators.
CLIP Lights in red when the input signal exceeds 0 dB (digital full scale).
SIG Lights in green when the input signal is greater than -40 dB.
+48 V Lights in orange when +48 V phantom power is supplied from the channel.
MEMO
You can adjust preamp gain and set phantom power on or o by remote control from an S-4000R unit or a
computer.
2
OUTPUT connector
These are balanced male XLR connectors. Amps and powered speakers are connected here. The signal level that is
output is +4 dBu (nominal, maximum output: +22 dBu).
3
[REAC MODE] switch
This sets the REAC’s operation mode.
For the correct operation of the system, the mode settings of REAC devices must be made correctly. Making the
wrong settings may result in incorrect audio input and output.
M The unit functions as a REAC master device.
S The unit functions as a REAC slave device.
SP The unit functions as a REAC split device.
NOTE
When changing the setting of the [REAC MODE] switch, rst turn o the power to the S-2416.
The mode is set according to the state of the switch at startup, and so changing the switch setting once the unit
is running does not change the mode.
REAC MODE indicator
The indicator lights up when communication with the connected REAC device is established.
It ashes during standby.
4
[MODE] switches
These set the operation mode of the S-2416. For details, refer to “[MODE] switches” (p. 10).
SAMPLE RATE indicator
This displays the sampling rate at which the unit is operating.
5
[MUTE ALL OUTPUTS] button
This mutes (silences) the system’s global audio output.
When the unit is muted, you can disconnect and connect input/output or REAC cables without producing noise.
When this is pressed, all output is muted within a second or two.
Releasing the button cancels muting.
MUTE ALL OUTPUTS indicator
Bekijk gratis de handleiding van Roland S-2416, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Roland |
| Model | S-2416 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5368 MB |
