Roland S-2416 handleiding
Handleiding
Je bekijkt pagina 13 van 28
Connecting REAC Devices
13
When Using AES/EBU INPUT
V-Mixer: Master
S-2416: Slave
Word-clock generator
IN
IN
AES/EBU
Mixer, etc.
S-2416 settings
[REAC MODE] switch Setting S (Slave)
[MODE] switch Setting
1 REAC SLAVE MODE ON CLOCK MASTER
5 AES/EBU INPUT OFF ENABLE
7
SAMPLE RATE
ON
WORD CLOCK
8 ON
NOTE
Change the setting of the [REAC MODE] switch and [MODE]
switch while the S-2416 is powered down.
V-Mixer settings
Set the REAC mode to FOH A (External Clock) or FOH B (External
Clock).
NOTE
• Word-clock frequencies that can be used for synchronization are
96, 48, and 44.1 kHz.
• Some V-Mixer models do not support 96 kHz.
When Making a Cascade Connection
With the S-2416, you can make a cascade connection using the REAC BACKUP port.
This section gives an overview of the settings when connecting the V-Mixer with a cascade connection to an S-1608 unit.
V-Mixer: Master
S-2416: Slave
S-1608: Slave
S-2416 settings
[REAC MODE] switch Setting S (Slave)
[MODE] switch Setting
2 REAC BACKUP MODE ON CASCADE
3
CASCADE OUTPUT Set according to the application
4
5 AES/EBU INPUT ON DISABLE
NOTE
Change the setting of the [REAC MODE] switch and [MODE]
switch while the S-2416 is powered down.
V-Mixer settings
Set the REAC mode to FOH.
S-1608 settings
Set the [REAC MODE] switch to S (slave).
NOTE
Change the setting of the [REAC MODE] switch and [MODE]
switch while the S-2416 is powered down.
With these connections and settings, the S-2416 adds the 16 inputs
of the S-1608 after the S-2416‘s 24 inputs, and sends them to the
V-Mixer.
Bekijk gratis de handleiding van Roland S-2416, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Roland |
| Model | S-2416 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5368 MB |
