Roland S-0808 handleiding

Niet gecategoriseerd

Roland

36 pagina's

PDF beschikbaar

Handleiding

Setting the Input Channels

With digital snake devices, you can adjust the preamp gain in the stage unit.

1. Select the channel.

Turn the [CHANNEL] knob to select the number of the channel whose settings you want to change.

fig.channel-dial.eps

2. Input the audio.

From the source devices, input the audio on the selected channel.

3. Adjust to a suitable level.

Turn the [GAIN] knob to adjust to a suitable level. The indicators around the knob indicate the gain level. The input level on the

select channel is displayed by the input level meter.

fig.turn-gain-dial.eps

4. Select another channel.

Turn the [CHANNEL] knob to select another channel, then repeat steps 2 and 3.

If the input level reaches 0 dB, the [CLIP] area of the input level meter and the [CLIP] area of the signal status indicator light up. If this happens, the

audio may be distorted. To transmit high-quality audio, adjust the preamp gain so that the peak level on the input level meter fluctuates between

-18 and -3 dB.

To make the illuminated [CLIP] indicators go dark, press the [CLIP CLEAR/ENTER] button.

fig.press-clip-clear.eps

Adjusting the Preamp Gain

Bekijk gratis de handleiding van Roland S-0808, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.