Roland R-1000 handleiding
Handleiding
Je bekijkt pagina 25 van 80
25
Connecting External Equipment
About Internal REAC Connections
Inside of the R-1000, REAC C/A and REAC D/B are connected as figures below. This enables the input/output between :
• devices connected to C and A
• devices connected to D and B
During recording, the internal REAC signal flow of the R-1000 is as below.
fig.int_REAC_connection.eps
When recording V-Mixer output on the R-1000, assign the channel you want to record to a REAC port with the output patchbay on the V-Mixer.
During playback, the internal REAC signal flow is changed as below.
fig.int_REAC_connect-play.eps
However, if track playback is assigned to output channel according to the [Assign the recorded data to an output channel] (p. 51), input from
external REAC device is cancelled and R-1000’s track playback is assigned to REAC output.
When using R-1000 output on a V-Mixer, assign the input from the REAC port to the input channel with the input patchbay on the V-Mixer.
D
C
IN 1 - 40
OUT 1 - 40
IN 1 - 40
OUT 1 - 40
OUT 1 - 40
IN 1 - 40
OUT 1 - 40
IN 1 - 40
B
A
A
B
TR 1 - 48
REC
D
C
IN 1 - 40
OUT 1 - 40
IN 1 - 40
OUT 1 - 40
OUT 1 - 40
IN 1 - 40
OUT 1 - 40
IN 1 - 40
B
A
A
B
PLAY
TR 1 - 48
R-1000_e.book 25 ページ ２０１１年１２月２１日 水曜日 午前１１時４５分
Bekijk gratis de handleiding van Roland R-1000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Roland |
| Model | R-1000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11191 MB |
