Roland MC-101 handleiding

21 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 21 van 21
MC-101 Update – Functions Added in Ver.1.02
2121
Added Functions for SCATTER
Expanded range of parameter settings
When the “Reverse setting is ON”, you can now use “RetrigGlide”.
Playback location indication
The step playback location can now be shown during playback.
Added Functions for TONE STEP EDIT
Improved operability
By holding down the SOUND/FILTER/MOD/FX button and turning
the VALUE dial, you can now change the adjustment range of each
parameter and make ne adjustments to the value.
Added alphabetical order display to the drum kit sound
browser
Alphabetical order display is now provided for drum kits.
Ø
For details on the sound browser, refer to “Reference Manual” (PDF).
Current Project Name Display Function
If you hold down the [PROJECT] button, the Project Name is now
displayed.
MOTION Punch-In
By holding down the [REC] button and operating the [C1]–[C4] knobs,
you can now punch-in Motions.
Added Automatic Setting Function for LOOPER Clips
When you change the MEASURE of a clip, the clip’s STEP LENGTH is now
specied in tandem.
Problems Fixed
¹
We xed the problem that had caused inaccuracies in the timing of notes
when synchronized with an external device.
¹
We xed the problem in which the unit was not recognized by a USB-
connected PC when the PC was started or restarted.
¹
We xed the problem that had caused a hangup when loading from a
project in the tone browser.
¹
We xed the problem in which the DrumInst was sometimes not applied
in the preset browser.
¹
We xed the problem in which a LOOPER clip would sometimes not play
correctly immediately after a project was loaded.
¹
We improved the situation in which the fade would weaken the attack
when recording to a LOOPER clip.
¹
We xed the problem in which an unwanted clip would remain when
recording to a LOOPER clip was cancelled mid-way.
¹
We xed the problem in which an invalid value exceeding the maximum
value of 100 could be specied for the Tone parameter of MFX - FUZZ.
¹
We xed the problem in which STEP LENGTH could be set to greater than
96 steps if the phrases SCALE value was set to triplets (1/4T, 1/8T, 1/16T).
¹
We reduced the noise when SCATTER is operating.
¹
Other minor problems have been xed.
Functions Added in Ver.1.02

Bekijk gratis de handleiding van Roland MC-101, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkRoland
ModelMC-101
CategorieNiet gecategoriseerd
TaalNederlands
Grootte3816 MB

Caratteristiche Prodotto

Kleur van het productZwart
Ingebouwd displayJa
Gewicht716 g
Breedte224 mm
Diepte132 mm