Roland EARTH Piano handleiding
Handleiding
Je bekijkt pagina 45 van 59
4545
MFX parameter list
BPM Looper
Loops a short portion of the input sound. This can automatically turn the
loop on/o in synchronization with the rhythm.
R out
L out
L in
R in
Loop Sw
Control
Loop Sw
Control
Delay
Delay
Delay
Delay
Parameter Value Explanation
Length 0–127 Species the length of the loop.
Rate (sync
sw)
OFF, ON Synchronize to the tempo of the
DAW if this is ON.
Rate Hz 0.05–10.00 [Hz] Cycle at which the loop
automatically turns on/o
Rate Note 1/64T, 1/64,
1/32T, 1/32,
1/16T, 1/32D,
1/16, 1/8T,
1/16D, 1/8, 1/4T,
1/8D, 1/4, 1/2T,
1/4D, 1/2, 1/1T,
1/2D, 1/1, 2/1T,
1/1D, 2/1
On Timing 1–8 Species the timing within the cycle
at which the loop automatically
starts (which step of the eight timing
divisions at which the sound is
heard)
On Length 1–8 Species the length at which the
loop automatically ends within the
cycle (the number of times that the
1/8-length of sound is heard)
Loop Mode OFF, AUTO, ON If this is AUTO, the loop automatically
turns on/o in synchronization with
the rhythm.
* If the eect is recalled with this
ON, this parameter must rst be
set to something other than ON in
order to make the loop operate.
Level 0–127 Output Level
LO-FI
LOFI Compress
Degrades the sound quality.
L in
L out
R outR in
Compressor Lo-Fi 2-Band EQ
Compressor Lo-Fi 2-Band EQ
Parameter Value Explanation
Pre Filter
Type
1, 2, 3, 4, 5, 6 Selects the type of lter applied to
the sound before it passes through
the Lo-Fi eect.
1: Compressor o
2–6: Compressor on
LoFi Type 1, 2, 3, 4, 5, 6,
7, 8, 9
Degrades the sound quality. The
sound quality grows poorer as this
value is increased.
Post Filter
Type
OFF, LPF, HPF Type of lter
OFF: No lter is used
LPF: Cuts the frequency range above
the Cuto Freq
HPF: Cuts the frequency range
below the Cuto Freq
Post Filter
Cuto
200, 250, 315,
400, 500, 630,
800, 1000, 1250,
1600, 2000,
2500, 3150,
4000, 5000,
6300, 8000 [Hz]
Basic frequency of the Post Filter
Low Gain -15–+15 [dB] Amount of boost/cut for the low-
frequency range
High Gain -15–+15 [dB] Amount of boost/cut for the high-
frequency range
Balance D100:0W–
D0:100W
Volume balance between the direct
sound (D) and the eect sound (W)
Level 0–127 Output Level
Bit Crusher
Produces an extreme lo- eect.
L in L out
R outR in
Bit Crusher 2-Band EQ
Bit Crusher 2-Band EQ
Parameter Value Explanation
Sample Rate 0–127 Adjusts the sample rate.
Bit Down 0–20 Adjusts the bit depth.
Filter 0–127 Adjusts the lter depth.
Low Gain -15–+15 [dB] Amount of boost/cut for the low-
frequency range
High Gain -15–+15 [dB] Amount of boost/cut for the high-
frequency range
Level 0–127 Output Level
Phonograph
Recreates the sound of an analog record being played on a record player.
This lets you simulate the unique noises produced when a record is played,
as well as the variations that occur when the record spins.
R out
L out
Balance W
Balance W
Balance D
Balance D
L in
R in
Phonograph
Phonograph
Parameter Value Explanation
Signal
Distortion
0–127 Sets the amount of distortion.
Frequency
Range
0–127 Sets the frequency characteristics of
the playback system.
Smaller values create the feeling
of an older system with narrow
frequency bands.
Disc Type LP, EP, SP Sets the turntable rotation speed.
This has an eect on the scratch
noise cycle.
Scratch Noise 0–127 Sets the volume of noise created by
scratches in the record.
Bekijk gratis de handleiding van Roland EARTH Piano, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Roland |
| Model | EARTH Piano |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12466 MB |
