Roland EARTH Piano handleiding
Handleiding
Je bekijkt pagina 14 van 59
1414
STUDIO panel
REVERB panel
Parameter Value Explanation
DIFFUSION 0–127 Adjusts the change in the density of
the reverb over time.
HF DAMP
FREQ
1000–8000 [Hz] Adjusts the frequency above which
the high-frequency portion of the
reverb sound is cut.
HF DAMP
RATIO
0.1–1.0 Adjusts the amount by which to
attenuate the high-frequency
portion of the reverb.
Hall
Parameter Value Explanation
PRE DELAY 0.0–100 [msec] Adjusts the delay time from when
the direct sound begins until the
reverb sound is heard.
TIME 0–127 Adjusts the decay length of the
reverb sound.
SIZE 1–8 Size of room/hall
HIGH CUT 160–12500 [Hz],
BYPASS
Adjusts the frequency above which
the high-frequency portion of the
nal output sound is cut (BYPASS:
no cut)
DENS
(Density)
0–127 Adjusts the density of the reverb
sound.
DIFFUSION 0–127 Adjusts the change in the density of
the reverb over time.
The higher the value, the denser the
sound becomes as time elapses. (The
eect is more obvious with longer
reverb times).
LF DAMP
FREQ
50–4000 [Hz] Adjusts the frequency below which
the low-frequency portion of the
reverb sound is cut.
LF DAMP
GAIN
-36–0 [dB] Adjusts the LF damp attenuation
amount (0: no eect).
HF DAMP
FREQ
4000–12500
[Hz]
Adjusts the frequency above which
the high-frequency portion of the
reverb sound is cut.
HF DAMP
GAIN
-36–0 [dB] Adjusts the HF damp attenuation
amount (0: no eect).
GS Reverb
Parameter Value Explanation
CHAR ROOM1–3,
HALL1–2, PLATE,
DELAY, PAN-
DELAY
This selects the reverb type.
PRE-LPF 0–7 Adjusts the amount of high-
frequency attenuation for the sound
being input to the reverb.
TIME 0–127 Adjusts the decay length of the
reverb sound.
DELAY
FEEDBACK
0–127 Adjusts the level at which the reverb
sound is returned to the input.
SRV-2000
Parameter Value Explanation
SELECTION Selects the type of reverb oered by the Roland SRV-
2000 digital reverb.
R0.3–R37 Room reverb.
Higher values increase the size of
the room.
H15–H37 Hall reverb.
Higher values increase the size of the
concert hall.
P-B Plate reverb.
A more amboyant reverb sound
than P-A.
P-A Plate reverb.
PRE DELAY 0–160 Adjusts the delay time from when
the direct sound begins until the
reverb sound is heard.
TIME 1–990 [msec] Adjusts the decay length of the
reverb sound.
HF DAMP 0.05–1.00 Adjusts the high-frequency portion
of the reverb.
DENSITY 0–9 Adjusts the density of the late
reverberation.
ATTACK GAIN 0–9 Adjusts the gain of the early
reections.
ATTACK TIME 0–9 Adjusts the time of the early
reections.
EARLY
REFLECT
DENSITY
0–9 Adjusts the density of the early
reections.
Parameter Value Explanation
EARLY
REFLECT
LEVEL
0–99 Adjusts the volume of the early
reections.
EQ LOW
FREQ
0.04–1.00 [kHz] Frequency of the low range.
EQ LOW
GAIN
-24–+12 [dB] Gain of the low range.
EQ MID FREQ 0.25–9.99 [kHz] Frequency of the middle range.
EQ MID GAIN -24–+12 [dB] Gain of the middle range.
EQ MID Q 0.2–9.0 Sets the width of the mid-frequency
range.
Higher values make the width more
narrow.
EQ HI FREQ 0.80–9.99 [kHz] Frequency of the high range.
EQ HI GAIN -24–+12 [dB] Gain of the high range
EQ HI Q 0.2–9.0 Species the width of the high-
frequency range.
Higher values make the width more
narrow.
SRV-2000 Non-Linear
Parameter Value Explanation
PRE DELAY 0–160 Adjusts the delay time from when
the direct sound begins until the
reverb sound is heard.
REVERB TIME 1–990 [msec] Adjusts the decay length of the
reverb sound.
GATE TIME 10–450 [msec] Adjusts the time from when the
reverb starts being heard until the
reverb sound is cut o.
HF DAMP 0.05–1.00 Adjusts the high-frequency portion
of the reverb.
EQ LOW
FREQ
0.04–1.00 [kHz] Frequency of the low range.
EQ LOW GAIN -24–+12 [dB] Gain of the low range.
EQ MID FREQ 0.25–9.99 [kHz] Frequency of the middle range.
EQ MID GAIN -24–+12 [dB] Gain of the middle range.
EQ MID Q 0.2–9.0 Sets the width of the mid-frequency
range.
Higher values make the width more
narrow.
EQ HI FREQ 0.80–9.99 [kHz] Frequency of the high range.
EQ HI GAIN -24–+12 [dB] Gain of the high range
Bekijk gratis de handleiding van Roland EARTH Piano, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Roland |
| Model | EARTH Piano |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12466 MB |
