Roccat Afterglow Wave Dual Charger Handleiding (77 Pagina's)

Handleiding

a.

Add clickable Link to Apple Store

b.

Add clickable Link to Goggle Play Store

3.

Connecting to the PDP Control Hub Mobile App

a.

If you have not yet downloaded the PDP Control Hub, please do so by following the link

above.

b.

Once downloaded, launch the app.

c.

While the app is searching for a device, press and hold the Sync button located on the

left side of the charger for 3 seconds.

d.

The charger will begin pairing to the mobile device. While in pairing mode, the LEDs

around the charger will blink white.

e.

Once paired, the LEDs will return to their default state and the charger will be displayed

in the app.

f.

If pairing fails, the LEDs will flash red and then return to their default or programmed

state.

g.

Refer to the in-app guide for customized lighting.

4.

Cycle through lighting profiles

• By default, the charger has 5 pre-loaded LED profiles: Wave, Static, Breathing, Pulse, and

Ripple.

• To cycle through the saved lighting effects, press the profile button located on the right

side of the charger.

• Each LED profile can be customized in the PDP Control Hub mobile app.

TROUBLESHOOTING

1.

Controllers not charging

a.

Make sure that the USB cable is plugged into the charger base and into the console

i.

If the charger is drawing power from a source other than the PS5® console,

the controllers may not charge.

b.

Make sure that the controller is properly placed on the charger with the charging

pins connecting to the controller.

c.

If the controllers are fully charged, then the controllers will not charge.

2.

LED lighting not working

a.

The LEDs will be activated when a controller is placed on the charger, regardless of if the

controller is being charged or not. If no controller is on the charger, then only the PDP

logo will be illuminated.

Bekijk gratis de handleiding van Roccat Afterglow Wave Dual Charger, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.