Robot Coupe MP 350 Turbo V.V. handleiding

Blender

Robot Coupe

62 pagina's

PDF beschikbaar

Handleiding

ENGLISH

• MIXING TOOL HOUSING

Never immerse the mixing tool housing

in water or put it in the dishwasher.

Instead, clean it with a slightly damp

cloth.

• MIXING TOOL

The mixing tool can be washed either by

hand or in the dishwasher. You can also

clean it with a slightly damp cloth.

MAINTENANCE

• BLADE

Over time the blades will become worn and will

need to be replaced. The washer and seals should

also be replaced at this time. A blade service kit is

available.

• TUBE SEAL

In order to maintain a watertight seal between the

tube and bell, inspect the seal for wear and replace

it if necessary.

• SEAL RING

The seal ring can be lubricated using a suitable

food grade grease. In order to maintain a watertight

seal, check the seal ring for wear and replace it if

necessary.

• WHISKS

The performance of the whisks depends on the

condition of the wires. The metal wires may become

worn over time. In order to ensure optimum

performance, they will need to be replaced. Do not

use a defective or damaged whisk!

2) Cartridge mounting :

Direct the ears of car-

tridge

in order to be

aligned with the groove

of the bell

. Push the

cartridge with the hand

in the direction of arrow,

then clip on into the bell

thanks to the knife dis-

mantling tool.

• CARTRIDGE

You need to change the cartridge :

- If liquid starts seeping into the foot

- If there is any play in the blade

1) Cartridge dismantling :

Position the knife dismantling tool

on the

cartridge

. Remove the cartridge from its place

by knocking

on the knife dismantling tool

with a plastic mallet.

• POWER CORD:

For your safety, make sure the power cord is

always in good condition. The cord is subjected to

considerable wear and tear, and must be replaced if

it is damaged in any way (cuts, burns, etc.).

Procedure for replacing the power cord:

1) Use the dismantling tool supplied with the new

replacement cord.

2) Press the push button (see photo) and pull on the

cord without releasing the dismantling tool.

Installing the new cord:

Turn to page 6

Bekijk gratis de handleiding van Robot Coupe MP 350 Turbo V.V., stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.