Roborock Q7T+ handleiding
Handleiding
Je bekijkt pagina 10 van 52
10
The default Do Not Disturb (DND) period is
from 22:00 to 08:00. You can use the app to
modify the DND period or disable the
mode. In DND mode, the robot will not play
voice messages.
DND Mode
Note: Do not use chemicals such as cleaning fluids and
sprays to clean these sensors.
Routine Maintenance
C
*
Clean every 2 weeks and replace every 6-12 months.
C1
Main Brush
*
Clean monthly and replace every 3-6 months.
C2
Side Brush
*
Clean as required.
C3
Robot Sensors
C1-1—
Turn over the robot and press the
main brush cover latches to remove
the main brush cover.
Note: The omnidirectional wheel bracket cannot be
removed.
*
Clean as required.
C4
Omnidirectional Wheel
C4-1—
Use a tool, such as a small
screwdriver, to pry out the axle and
take out the wheel.
C4-2—
Rinse the wheel and the axle with
water to remove any hair and dirt.
Air-dry, reinstall, and press the wheel
and axle back in place.
Unscrew the side brush screw. Remove and
clean the side brush. Then, reinstall the
brush and tighten the screw.
Use a soft, dry cloth to wipe and clean all
sensors, including:
*
Clean as required.
C5
Main Wheels
Clean the main wheels with a soft, dry cloth.
C1-2—
Remove the main brush and clean it.
*
Clean after each use and replace every 3-6 months.
C7
Mop Cloth
C7-1—
Remove the mop cloth mount in the
direction shown in the picture.
C7-2—
Remove the mop cloth from the mount.
C7-3—
Wash the mop cloth and then air-dry it.
C3-1—
Dock Locator
C3-2—
Cliff Sensors
C1-3—
Reinstall the main brush and main
brush cover, and press the cover
securely.
Note: After mopping, empty the water tank, wash the
mop cloth, and air-dry them to prevent odors.
*
Clean as required.
C6
Dustbin and Water Tank
Combo Unit
C6-1—
Press the release button to take out
the unit.
C6-2—
Open the lid of the unit, empty the
dustbin and clean it.
C6-3—
Open the water tank stopper and
empty the tank.
C6-4—
Reinstall the unit in the robot.
Notes:
• It is recommended to wipe the main brush with a wet
cloth. If the main brush is soaked, air-dry it away from
direct sunlight.
• Do not use corrosive cleaning fluid or disinfectant to
clean the main brush.
If the robot does not respond when a button
is pressed or cannot be turned off, power it
on and press and hold for five seconds.
After hearing a voice message, press and
hold for five seconds. The robot will then
restart and be restored to factory settings.
Restoring Factory Settings
Note: After this process, existing settings such as
scheduled cleaning and WiFi will be restored to factory
settings.
If an error occurs, the power indicator light
will flash red. A pop-up notification will appear
in the app and a voice alert may sound.
Error
Notes:
• The robot will go to sleep automatically if left in a
malfunctioning state for over 10 minutes.
• Placing a malfunctioning robot on the dock manually
will end the current cleanup.
Bekijk gratis de handleiding van Roborock Q7T+, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Roborock |
| Model | Q7T+ |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 4407 MB |
