Roborock F25 ACE handleiding
Handleiding
Je bekijkt pagina 12 van 52
1212
D1-1—Uninstall the dirty tank, pull out the
tank cover, and remove the filter on
the tank cover. Use the provided
maintenance brush to clean the
Notes:
•
Allow at least 24 hours for the filter to dry thoroughly
before reinstalling it.
•
Do not touch the filter surface with hands, brushes, or
sharp objects to avoid damaging it.
D1-2—Dry all the parts thoroughly before
reinstalling them back in place.
D2-1—Grip the clean tank handle, press the
release button, and gently pull the
clean tank upwards at a slight angle
to uninstall the tank.
D2-3—Grab the roller release tab and pull
the roller out along the cleaner head.
Use the provided maintenance brush
to remove the dirt on the roller, then
rinse it with clean water.
D2-4—When you need to replace the roller,
pull the roller cap out of the roller by
grabbing the whole cap. Then, install
the roller cap to a new roller.
Notes:
•
Use the maintenance brush carefully to avoid injury.
•
When you detach the roller cap, do not pull it by its
handle.
•
To prevent potential damage, keep the roller cap
attached while cleaning the roller.
If this product is left unused for a prolonged
period of time, fully charge it, unplug it,
and store it in a cool and dry place. Do not
place it in humid locations or direct sunlight.
Charge it at least once every 3 months to
avoid battery overdischarge.
Product Maintenance
D1
Dirty Tank and Filter
D2
Clean Tank and Roller
Wipe and clean the vacuum cleaner with a
soft, dry cloth. Before cleaning, remove the
vacuum cleaner from the charging dock and
power it off.
Vacuum Cleaner
D2-2—Rinse the tank bottom with clean water.
D2-5—Reinstall the roller and clean tank.
1. Power off the vacuum cleaner and place
it in a stable position, then remove the
dirty tank, clean tank, and roller.
2. Clean the roller slot and dirty water
pathway with the provided maintenance
brush.
3. Reinstall the dirty tank, clean tank, and
roller.
Unplug the charging dock and use a
soft, dry cloth to clean its surface and the
charging contacts.
Clean the adaptive drive wheels regularly.
Do not rinse the charging dock directly with water.Note:
Do not rinse the cleaner head directly with water.Note:
D4
Cleaner Head and Dirty
Water Pathway
D3
Adaptive Drive Wheels
D5
Charging Dock
•
The frequency of replacement may vary with the
actual situation. If abnormal wear occurs, replace the
parts immediately.
•
The vacuum cleaner must be powered off or stopped
running, and the charging dock unplugged before you
clean or maintain them.
Notes:
Part
Maintenance
Frequency
Replacement
Frequency
Clean tank 2-4 weeks N/A
Adaptive
drive wheels
As needed N/A
debris on the filter. If the filter is very
dirty, rinse it with cold water and
shake off the remaining water.
Bekijk gratis de handleiding van Roborock F25 ACE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Roborock |
| Model | F25 ACE |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 4555 MB |
