Roborock F25 ACE handleiding
Handleiding
Je bekijkt pagina 10 van 52
1010
Open the Roborock app, tap the "Add
Device" or "+" button and add your device
following the in-app guide.
Notes:
•
The actual process may vary due to ongoing app
updates. Follow the instructions provided in the app.
•
Only 2.4 GHz WiFi is supported.
•
If the vacuum cleaner waits more than half an hour for
a connection, WiFi will be automatically disabled. If you
want to reconnect, reset the WiFi before proceeding.
C1-1—Grip the clean tank handle, press the
release button, and gently pull the
clean tank upwards at a slight angle.
Instructions for Use
C
C1
Filling the Clean Tank
Keep the vacuum cleaner upright, the LED
display on, and the machine on standby.
Press and hold the
and buttons
simultaneously until you hear the "Resetting
WiFi" voice message. The reset is complete
when the WiFi indicator flashes slowly.
The vacuum cleaner will then wait for a
connection.
If you cannot connect to the vacuum cleaner due
to your router configuration, a forgotten password, or
any other reason, reset the WiFi and add your vacuum
cleaner as a new device.
Note:
2. Reset WiFi
3. Add Device
C1-2—Open the cap of the clean tank refill
port, add tap water, and then close
the cap.
C1-3—Open the cap of the cleaning solution
refill port, add compatible cleaning
solution, and then close the cap.
Notes:
•
To avoid deforming the clean tank, only use cold water.
•
To prevent corrosion or damage, do not use
any disinfectant and only use cleaning solutions
recommended by Roborock such as Roborock Floor
Cleaning Solution.
•
To improve cleaning performance, we suggest that
you add the recommended cleaning solution to
the cleaning solution refill port before use. During
cleaning, the machine will automatically add cleaning
solution to clean water based on the preset ratio.
C1-4—Place the clean tank back to the
cleaner head. Push it down gently
until it clicks into place.
Pull the handle to unlock the vacuum
cleaner, and press the
button to start it.
Always lay the vacuum cleaner flat with the
buttons on the handle facing up.
Note:
C3
Starting the Vacuum Cleaner
C4
Lay-Flat Cleaning
Press the button to switch between AUTO,
MAX, ECO, and Sponge modes. The screen
will display the icon of the current mode.
C5
Mode Switching
C2
Locking and Unlocking
The vacuum cleaner can be laid flat to
clean under furniture. To lay it flat on the
floor, lower the handle while using the
machine. The available capacity of the dirty
tank decreases during lay-flat cleaning.
Therefore, it is recommended to empty the
dirty tank before cleaning under furniture.
1. Press the
button during cleaning to
pause the vacuum cleaner. It is now on
standby.
Standby and Power off
C2-1—Locked
C2-2—Unlocked
Search for "Roborock" in the App Store
or Google Play or scan the QR code to
download and install the app.
Connecting to the App
1. Download the App
Lightly step on the cleaner head and hold the
handle. Push it to lock the vacuum cleaner,
and pull it to unlock the vacuum cleaner.
Bekijk gratis de handleiding van Roborock F25 ACE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Roborock |
| Model | F25 ACE |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 4555 MB |
