RME 12Mic-D handleiding
Handleiding
Je bekijkt pagina 13 van 85
3.4. Standby Switch
The front panel encoder acts as a standby switch. While in standby mode, the device is completely
powered down except for a red LED. No signals are processed or passed on.
Possible actions:
• When the device is in standby mode, pushing the encoder for two seconds will boot the device.
• When the device is powered on, push and hold the encoder for several seconds in order to power
down the device. A red progress bar is shown while the encoder is pushed.
3.5. Standby Indicator
The following illumination patterns are possible:
No illumination
• There is no power at either of the two power inlets.
• The power switch at the rear of the device is set to 'Off'.
• Dark mode has been activated.
Permanent red illumination
• The device is powered off but is receiving power at either one of the power inlets.
Permanent white illumination
• The device is powered on and all systems are working without warning.
Alternating red/white illumination
• Something is not working properly. This is triggered when one of the four display
sections: STATE, INPUT, OUTPUT, or CLOCK shows a warning.
RME 12Mic-D User’s Guide
3.4. Standby Switch | 12
Bekijk gratis de handleiding van RME 12Mic-D, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | RME |
| Model | 12Mic-D |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11970 MB |
