RME 12Mic-D handleiding
Handleiding
Je bekijkt pagina 12 van 85
3.1. Hardware Specifications
RME 12Mic-D
EAN 42 6012336 341 3
Dimensions 440 x 44 x 243 mm (17.3 x 1.7 x 9.6 inches)
Weight 2.8 kg (6.2 lbs)
Package 560 x 315 x 115 mm (22.1 x 12.4 x 4.5 inches)
Conformity CE, FCC, WEEE, RoHS
Power supply internal 36 W 100-240 V AC
external 12 V d.c. 2.5 A (PS2) optional
Power consumption typ. 20 W, standby 0.5W
3.2. Package Contents
The package of the 12Mic-D contains the following items:
• 12Mic-D
• two rack mount brackets
• four screws for rack mount brackets
• one power cord
• one Cat5e network cable
• printed manual
If any item is missing from a factory-sealed package, please contact your support
immediately.
3.3. Power On
The 12Mic-D has a power switch at the AC inlet and a standby switch at the front.
Perform the following steps to power on the 12Mic-D:
1. Ensure that one of the power inlets is properly connected to a power source.
2. When using the AC inlet, toggle the mains switch at the back of the device to position I (down).
The power indicator will light up in red (Standby) or white (On). This depends on the state of the
device before it was disconnected from a power source.
3. If the device is in standby mode, hold the encoder for two seconds to boot the device.
The 12Mic-D features a dark mode which deactivates some or all lights of the front
panel. This can be used to let the device appear powered off when it is in fact powered
on. A short push on the encoder or any button deactivates this mode temporarily.
RME 12Mic-D User’s Guide
3.1. Hardware Specifications | 11
Bekijk gratis de handleiding van RME 12Mic-D, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | RME |
| Model | 12Mic-D |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11970 MB |
