Handleiding
Je bekijkt pagina 19 van 40

Rinnai 19 GD OIM
CLEANING THE AIR INLET FILTER
1. The air inlet lter is located at the bottom of the appliance. Pull it out as shown.
2. Remove any dust from the lint lter by using your hands, a soft cloth or a soft brush as shown. If removal of
the lint proves dicult, the lint lter may also be cleaned with the assistance of COLD water and a soft cloth or
brush, a mild dish washing detergent may also be used.
CAUTION
If water has been used to clean the air inlet lter, then the lter MUST BE thoroughly dried before
it can be reassembled and reinstalled.
The air inlet lter is NOT dishwasher safe.
The air inlet lter MUST NOT be obstructed by carpets.
3. After removing dust, re-insert the air inlet lter. The sides of the lter are located and guided by rails at the
bottom of the dryer body.
4. Insert the air inlet lter along the rails on the base of the main unit and push in as far as possible.
1 2 3
Air Inlet Filter
4
Make sure to insert the front and back
of the filter in correctly.
CARE & MAINTENANCE
Bekijk gratis de handleiding van Rinnai Dry-Soft 9 DRYSOFT9L, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | Rinnai |
Model | Dry-Soft 9 DRYSOFT9L |
Categorie | Wasdroger |
Taal | Nederlands |
Grootte | 5820 MB |