Handleiding
Je bekijkt pagina 11 van 40
Rinnai 11 GD OIM
OPERATIONAL TIME
Automatic Programs: When using Automatic Programs the dryer
senses the clothes volume, moisture content and drying progress
continuously. Drying will continue until the items have dried suciently.
The approximate remaining drying time is indicated on the digital display
approximately 2 minutes after the start of operation.
NOTE
In Automatic Drying mode the remaining drying time indicated is approximate only and will be less
accurate if the CLEAN FILTER indicator is illuminated. The remaining drying time indicated on the
digital display counts down in 5 minute increments until there is only 1 minute remaining.
Timer Operation: When using TIMER based drying, the user selects the duration of the drying period. Drying
operation will end when the time has elapsed regardless of whether clothes are dry or not. The remaining drying
time indicated on the digital display counts down in 5 minute increments until there is only 1 minute remaining.
SELF-CLEAN Operation: Before drying, the inside of the drum is sterilized with warm air at 80°C or higher for 3
minutes. This function is useful if you used the equipment to dry items other than clothes and you want to clean
the inside of the drum before using it again.
SOFTEN & COOL FUNCTION
This function starts 1 minute after the selected drying operation ends. As the inside of the drum is hot and oils
remaining on items can cause spontaneous combustion. This function is automatically started 1 minute after a
drying operation ends. This involves 3 minutes of continuous drum rotation followed by intermittent drum rotation
(1 minute approximately every 4 minutes) for a maximum of 76 minutes.
NOTE
To cancel SOFTEN & COOL operation:
1. Press the START/PAUSE button.
2. Wait for the drum to stop rotating and
then open the door.
3. Remove any items.
4. Press the ON/OFF button. The SOFTEN
& COOL operation will now stop and
the dryer is turned OFF.
5. Close the door.
INTERRUPTIONS TO PROGRAMS
If a power outage occurs when the dryer is operating, when power is restored the dry will be in the OFF condition.
Pressing the power button will place the dryer into SOFTEN & COOL operation and the error code 00 will also be
ashing in the digital display.
IMPORTANT
To clear an error condition caused by disruption to power, follow the procedure used to cancel the
SOFTEN & COOL function in the previous section.
~ 2 min
3
BEEP
1
2
Wait for drum to stop rotating and then open the door.
BEEP
OPERATION
Bekijk gratis de handleiding van Rinnai Dry-Soft 9 DRYSOFT9L, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Rinnai |
| Model | Dry-Soft 9 DRYSOFT9L |
| Categorie | Wasdroger |
| Taal | Nederlands |
| Grootte | 5820 MB |
