Rinnai A Series handleiding

28 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 17 van 28
Rinnai 17 Evap AC OM
OPERATING YOUR MANUAL WALL CONTROL
The Manual Wall Control requires you to manually control Pump (and Pre-Wet cycle) operations, fan operation
and the fan speed. On days of high humidity for ventilation the fan may be operated without operating the pump.
To run the Cooler
1. Push the ON/OFF button (1) to turn the controller ON, the Power indicator (2) will illuminate.
2. Slide the COOL switch (3) to the ON position. This will operate the pump.
IMPORTANT
After sliding the COOL switch (3) ON allow 5–10 minutes to Pre-Wet the lter pads before sliding
the FAN switch (4) ON. Doing this will provide for the maximum cooling immediately when the fan
is switched ON.
4. Slide the FAN switch (4) to the ON position.
5. Rotate the FAN SPEED dial (5) to set the desired airow level.
To turn OFF
1. Push the ON/OFF button (1) to turn the controller OFF, the Power indicator (2) will go out.
To run the Fan for ventilation
1. If already cooling, slide the COOL switch (3) to the OFF position, this will turn o󰀨 the pump and use the fan
for ventilation only.
OR
1. When OFF, push the ON/OFF button (1) to turn the controller ON, the Power indicator (2) will illuminate.
2. Slide the Fan switch (4) to the ON position.
3. Rotate the Fan Speed dial (5) to set the desired airow level.
3
1
4
5
2
MANUAL WALL CONTROLLER OPERATION

Bekijk gratis de handleiding van Rinnai A Series, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkRinnai
ModelA Series
CategorieAirco
TaalNederlands
Grootte4722 MB