Handleiding
Je bekijkt pagina 14 van 28
Rinnai 14 Evap AC OM
CODED MESSAGES
While the Rinnai Networker is operating your system, it is also monitoring and controlling every aspect of the
system's performance. If anything unusual occurs, the Rinnai Networker will display an error message.
•
A message (23) stating "Cooler Fault - E01 Code #?? For assistance call 1300 555 545" will scroll across the
top of the screen. Note that the message will vary depending on the problem.
•
Whenever such a message appears, it is a good idea to write it down before doing anything else. This code
contains information that will enable Rinnai to deal quickly and easily with anything that requires their attention.
With many of them you will be asked to contact Rinnai Service and pass on the message, the model and the
type of appliance.
MESSAGE REPEATING
Push the FUNCTION button (2) then Key 1 (14) immediately after to repeat a message.
NOTE
If no message repeats it means either the button combination was incorrect or the event has
passed. Typical messages displayed advise of some appliance operations such as - “Pre-Wetting
cooler pads - Please Wait!”.
SERVICE NOTIFICATION MESSAGE
When the operating hours logged for an appliance reach a predetermined duration, the spanner symbol
ashes once per second on the networker and a message displays, such as:
Fan run hours indicate it is time for a service call - For assistance call 1300 555 545
A service call may be booked.
RESETTING
If something has interrupted the units operation, the word Reset (26) may appear beside Key 4 (17) while a
message is scrolling. Press Key 4 (17) to re-start the Cooler.
If the Cooler does not resume normal operation, or the error message re-appears, contact Rinnai Service.
If the Cooler is still operating but the Rinnai Networker is showing an error message try pushing the Key 4 (17) to
clear the fault. If the fault persists contact Rinnai Service.
If the Cooler is not operating and any other error message appears, contact Rinnai Service.
1
9
2
6
5
3
7
4
12
10
13
11
14
15
16
17
18
NETWORKER WALL CONTROL OPERATION
Bekijk gratis de handleiding van Rinnai A Series, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Rinnai |
| Model | A Series |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 4722 MB |
