Rikon 70-105 handleiding

Handleiding

1234567891011121314151617181920/ 20

Afdrukken

Je bekijkt pagina 12 van 20

12

ADJUSTMENTS

ADJUSTING THE TAILSTOCK

Loosen the locking lever (A) to move the tailstock

along the lathe bed to the desired position for

holding your work piece. Then tighten the locking

lever to secure the tailstock on the bed. FIG. 11.

To adjust the clamping action of the tailstock on

the bed, adjust the lower locking nut. See the

instructions listed on page 9, FIG. 2.

To adjust the tailstock spindle in or out to hold or

release your work piece, loosen the locking lever

(B) and turn the hand wheel (C). The tailstock

spindle (ram) (D) will travel from 0” to 1-3/4”.

When the tailstock spindle holding the live center

(E) is in a desired position, tighten the locking

lever (A). FIG. 11.

CHANGING SPINDLE SPEEDS

The lathe features ve step motor and spindle

pulleys to provide different spindle speeds. Open

the two access covers to change spindle speeds.

FIG. 12.

1. With the access covers open, loosen the

locking lever handle (F) that secures the motor in

place, and raise the motor mounting plate lever

(G) to release the belt tension on the motor and

spindle pulleys.

2. Check the speed and belt position chart to

determine the spindle speed required for your

turning. Then move the drive belt to the desired

pulley combination.

3. With the locking lever handle and motor being

loose, the motor’s weight will provide the proper

tension on the drive belt. Re-tighten the locking

lever and close access covers. NOTE: Do not put

excess tension on the drive belt or excess wear

or damage to the bearing or motor may result.

FIG. 11

FIG. 12

FIG. 13

THE MACHINE MUST NOT BE

PLUGGED IN AND THE POWER SWITCH MUST BE IN THE

OFF POSITION UNTIL ALL ADJUSTMENTS ARE COMPLETE.

5 SPINDLE SPEEDS

ABCDE

F G H I

J

Head

Stock

Motor

500 RPM

(A on F)

1,175 RPM

(B on G)

1,850 RPM

(C on H)

2,225 RPM

(D on I)

3,200 RPM

(E onJ)

A

B

C

Tailstock

Lathe Bed

D

E

G

F

Motor Pulley

Spindle Pulley

1234567891011121314151617181920/ 20

Bekijk gratis de handleiding van Rikon 70-105, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Gerelateerde producten van Rikon (Niet gecategoriseerd)

Handleiding bekijken

Rikon 70-305

Niet gecategoriseerd - handleiding

Handleiding bekijken

Rikon 34-255

Niet gecategoriseerd - handleiding

Handleiding bekijken

Rikon 10-345

Niet gecategoriseerd - handleiding

Handleiding bekijken

Rikon 70-1824VSR2

Niet gecategoriseerd - handleiding

Handleiding bekijken

Rikon 50-310

Niet gecategoriseerd - handleiding

Andere merken in Niet gecategoriseerd