Rigol MHO2034 handleiding
Handleiding
Je bekijkt pagina 227 van 332
17
Reference Waveform
This series oscilloscope provides 10 reference waveform positions (Ref1~Ref10). In
the actual test process, you can compare the signal waveform with the reference
waveform to locate the failure.
17.1 To Enable the Ref Function
To enter the Ref interface, perform any of the following operations:
• Click or tap the function navigation icon at the lower-left corner of the
screen, and then select Ref to enter the reference waveform function menu.
• Press the front-panel
key to enter the reference waveform function menu.
Figure 17.1 Reference Waveform Menu
17.2 To Set the Reference Waveform
In the Ref menu, you can specify a channel to serve as the reference channel, save
and clear the reference channel.
Select the Reference Channel
Click or tap the drop-down button of Current to select the reference waveform
channel (Ref1-Ref10) from the drop-down list. By default, Ref1 is enabled.
Reference Waveform
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved. MHO2000 User Guide
209
Bekijk gratis de handleiding van Rigol MHO2034, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Rigol |
| Model | MHO2034 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 47982 MB |
