Rigol M302 handleiding
Handleiding
Je bekijkt pagina 76 van 84
RIGOL
M300 Quick Guide
26
To Configure Scan List
Create a scan list and add any channels of the multiplexer or the DIO or TOT
channels of the multifunction module to the scan list; then, configure the basic
measurement, scaling, alarm and advanced measurement parameters for each
channel. The edited scan list can be stored in internal or external memory and be
recalled when required.
1 Create a new list
Press Config New, input the desired list name and press OK.
Note: The existing scan list will be overwritten by the scan list currently created.
2 Set the scan parameters
(1) Select Sweep and use the left/right arrow key to select “Infinite” or “1”
(you need to set a value and the range is from 1 to 50000).
(2) Select Trigger Mode and use the left/right arrow key to select “Auto”,
“Manual”, “External”, “AbsTime” or “Alarm”.
(3) If “Auto” is selected, please select Interval and use the numeric keyboard
to set a desired interval. The range is from 00:00:00.000 to 99:59:59.999
(the time format is Hour:Minute:Second.Millisecond) and the default is 0.
If “External” is selected, please select Edge and use the left/right arrow key
to select “Rising” or “Falling”.
If “AbsTime” is selected, please select AbsTime and use the numeric
keyboard to set a desired time. The time format is “Month-Date
Hour:Minute:Second”.
If “Alarm” is selected, please select Channel and use the left/right arrow
key to select “Alarm1”, “Alarm2”, “Alarm3” or “Alarm4”.
3 Configure a channel to the scan list (taking the DCV measurement
function as an example
）
Press ConfigEditNew to enter the channel configuration guide.
(1) Step 1: Measurement Configuration
Select Chan No. and use the left/right arrow key to select the desired
channel number (for example, 101);
Select Function and use the left/right arrow key to select the desired
function (for example, DCV);
Select Range and use the left/right arrow key to select the desired range
(for example, 2V).
Note: The parameters need to be set in this step depend on the
measurement function selected.
(2) Step 2: Scaling Configuration
Select Scaling and use the left/right arrow key to enable the scaling
Bekijk gratis de handleiding van Rigol M302, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Rigol |
| Model | M302 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6204 MB |
