RIDGID WD19560 handleiding
Handleiding
Je bekijkt pagina 9 van 40
OPERATION
!
WARNING: To reduce the risk of fire, explosion, or damage to Vac:
• Do not leave Vac running while unattended - you may fail to notice important signs indicating abnormal
operation such as loss of suction, debris/liquid exiting the exhaust, or abnormal motor noises.
Immediately stop using Vac if you notice these signs.
•
Do not leave Vac plugged in when not in use.
•
Do not continue running when float has cut off suction.
•
Sparks inside the motor can ignite airborne flammables. Do not operate Vac near flammable liquids or in
areas with flammable gases, vapors, or explosive/airborne dust. Flammable liquids, gases, and vapors
include: lighter fluid, solvent-type cleaners, oil-based paints, gasoline, alcohol, and aerosol sprays.
Explosive dusts include: coal, magnesium, aluminum, grain, and gun powder.
•
Do not vacuum up explosive dusts, flammable liquids, or hot ashes.
•
Do not leave sawdust or rags with stain or polyurethane residue inside Vac. Empty drum after picking up
these potentially self-heating materials.
!
WARNING: To reduce the risk of electric shock or injury:
• Do not expose to rain or allow liquid to enter motor compartment. Store indoors.
•
Do not handle plug, switch, or Vac with wet hands.
•
Unplug Vac before servicing. If your Vac is not working as it should, has missing parts, has been dropped,
damaged, left outdoors, or dropped into water, return it to an authorized service center or call customer
service.
•
When using an extension cord, use only outdoor-rated cords that are in good condition. Do not allow the
connection to come into contact with liquid.
!
CAUTION: To reduce the risk of hearing damage, wear ear protectors when using the
Vac/Blower for extended time or in a noisy area.
POLARIZED PLUG / ON-OFF SWITCH (Fig. 12) VACUUMING DRY MATERIALS
To reduce the risk of electric shock, this Vac has a
Your Wet/Dry Vac comes with the VF5000 Qwik Lock (N)
Polarized Plug (one blade is wider than the other).
installed.
This Plug will fit in a Polarized Outlet only one
way. If the Plug does not fit fully in the Outlet,
1. The Filter must always be in correct position at all
reverse the Plug. If it still does not fit, contact a
times to avoid leaks and possible damage to Vac.
qualified electrician to install the proper Outlet.
2. When using your Vac to pick up very fine dust,
Do not change the Plug in any way.
it will be necessary for you to empty the Drum
With Power Cord plugged in, turn the Vac “ON”
and clean the Filter at more frequent intervals to
by pressing in on the “I” on the Power Switch.
maintain peak Vac performance.
To turn “OFF”, press the “O” on the Power Switch.
The symbols used on the Switch Actuator are NOTE: A dry Filter is necessary to pick up dry material.
international “ON & OFF” symbols. If you use your Vac to pick up dust when the Filter is wet,
the Filter will clog quickly and be very difficult to clean.
Fig. 12
Polarized
= ON
Plug
= OFF
ON/OFF
Power Switch
(A)
9
SP7156 ESF.indb 9SP7156 ESF.indb 9 5/8/24 10:09 AM5/8/24 10:09 AM
Bekijk gratis de handleiding van RIDGID WD19560, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | RIDGID |
| Model | WD19560 |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 6967 MB |
