RIDGID WD19560 handleiding
Handleiding
Je bekijkt pagina 11 van 40
11
SP7156 ESF.indb 11SP7156 ESF.indb 11 5/8/24 10:09 AM5/8/24 10:09 AM
OPERATION
BLOWING FEATURE (Fig. 14)
Your Wet/Dry Vac has the capability to be used as a
Blower for yard work, patio cleanup and workshop
applications to blow sawdust and other debris.
1. Locate the Blower Port, at the rear of the Wet/Dry
Vac Powerhead Assembly (A).
2. Locate the end of the TUG-A-LONG Positive Locking
Hose with Dual-Flex (D) and align it with the Vac
Blower Port. Push the Hose end straight into the
Blower Port until the Hose Locking Tab snaps into
place.
3. (Optional) Attach the Extension Wand (M) to swivel
end of the Hose. See Locking Accessories section
of this manual for instructions on connecting the
Locking Accessories.
4. Turn the Vac ON and you are ready to use your Vac
as a Blower.
5. To Remove Hose: Press the Hose Locking Tab and
pull the Hose end straight out of the Blower Port.
!
WARNING:
Always wear safety eyewear complying with
ANSI Z87.1 (or in Canada, CSA Z94.3) before
using as a blower.
!
WARNING:
To reduce the risk of injury to bystanders,
keep them clear of blowing debris.
!
CAUTION:
Wear a dust mask if blowing creates dust which
might be inhaled.
!
CAUTION:
To reduce the risk of hearing damage, wear ear
protectors when using the Vac/Blower for extended
time or in a noisy area.
Fig. 14
(A)
Blower
Hose
Port
Locking Tab
(D)
(M) (Optional)
INSERT HOSE REMOVE HOSE
Bekijk gratis de handleiding van RIDGID WD19560, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | RIDGID |
| Model | WD19560 |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 6967 MB |
