RIDGID RP 251 handleiding
Handleiding
Je bekijkt pagina 8 van 52
RP 251 Press Tool
999-995-443.10_REV. A
6
Amperage.......... 24 A
Power ................ 260 Watts
Head Rotation ... 360°
Duty Cycle ......... 3 Press /min.
Power Supply .... 12V Li-ion Rechargeable
Battery Pack (RIDGID
RB-1200 Series)
Wireless Connection
Range ................ 33 ft. (10 m)
Permissible
Humidity ............ 80% maximum
Operating Temperature
Range ................ 15° F to 122° F
(-10° C to 50° C)
Storage
Temperature ...... 32° F to 113° F
(0° C to 45° C)
Weight (no battery/
Attachment) ....... 3.57 lbs. (1.62 kg)
Dimensions (no battery/
Attachment) ....... 13" x 4.3" x 2.6"
(330 mm x 109 mm x 66 mm)
Sound Pressure
(L
PA)* .................. < 67.8 dB(A), K=2.5 dB(A)
Sound Power
(L
PW)* ................. < 75.8 dB(A), K=2.5 dB(A)
Vibration* ........... < 0.71 m/s
2
, K=1.5 m/s
2
* Sound and Vibration measurements are measured in
accordance with a standardized test per Standard EN
62481-1.
- Vibration levels may be used for comparison with oth-
er tools and for preliminary assessment of exposure.
- Sound and vibration emissions may vary due to your
location and specific use of these tools.
- Daily exposure levels for sound and vibration need
Figure 1B – Status Lights/Warning Label
Figure 2 – Machine Serial Number - Circled
digits indicate the year and month
of the manufacture. (YY = year, MM
= month, )
Specifications
Attachments ...... RIDGID Compact Series
Stroke Length .... 1.2" (30.5 mm)
Ram Force ........ 5,400 lbs. (24 kN)
Motor
Voltage .............. 10,8 V DC rated
QR-Code
Figure 3 – Controls Chart
Control Marking Description
Trigger/Run
Switch
—
Single press/release of trigger/run switch will power up the tool (LED work light ring
and Tool status light illuminated). The tool can now be used. Tool will stay powered up
and ready to use for 2 minutes. If the lights turn off, the switch will need to be pressed
again to allow tool to run.
Normal Mode: Depress run switch to start press cycle, release when tool locks on.
Normal mode is factory setting.
Control Mode: Depress run switch to engage attachment on workpiece. Make adjust-
ments as necessary. Press the run switch again to start press cycle, release when tool
locks on.
Releasing the switch will not stop the tool once it has locked on. This assures consis-
tent, repeatable press connection integrity.
Mode can be changed with RIDGID Link App, see “RIDGID Link App Connection
(Wireless Communication)” section.
Retract Button
Allows tool to be released without completing press. If used, press connection is not
complete and must be repeated.
Attachment
Mounting Pin
—
Holds attachment to tool. Must be fully inserted for tool to operate
Warning
Label
Retract
Button
Tool Status
Lights
Bekijk gratis de handleiding van RIDGID RP 251, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | RIDGID |
| Model | RP 251 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9266 MB |
