RIDGID 918-5 handleiding
Handleiding
Je bekijkt pagina 6 van 111
918 Roll Groover
999-998-946.10_REV D
4
chine operation and foot switch. Only the operator
should be in the work area when the machine is
running. This helps reduce the risk of injury.
• Restrict access or barricade the area when work-
piece extends beyond machine to provide a mini-
mum of one meter (3 feet) clearance from the
workpiece. Restricting access or barricading the
work area around the workpiece will reduce the risk
of entanglement.
• Only use power drives and threading machines
that operate under 58 rpm. Higher speed machines
increase the risk of injury.
• Always wear appropriate personal protective
equipment while setting up and using the roll
groover. Appropriate personal protective equipment
always includes eye protection and may include
equipment such as tight fitting leather gloves and
steel toed footwear.
• Only use roll groover to groove pipe of recom-
mended sizes and types according to these in -
structions. Other uses or modifying the roll groover
for other applications may increase the risk of injury.
• Before operating roll groover, read and under-
stand:
– This operator’s manual
– The operators’ manual for Power Drive or Threading
Machine
– The fitting manufacturer’s installation instructions
– The instructions for any other equipment or material
used with this machine
Failure to follow all instructions and warnings may
result in property damage and/or serious injury.
RIDGID Contact Information
If you have any question concerning this RIDGID
®
product:
– Contact your local RIDGID
®
distributor.
– Visit RIDGID.com to find your local RIDGID contact
point.
– Contact Ridge Tool Technical Service Department at
ProToolsTechService@Emerson.com, or in the U.S.
and Cana da call 844-789-8665.
Description
The RIDGID
®
918 Roll Groover is designed to form rolled
grooves in steel, stainless steel, aluminum, PVC pipes
and copper tubes. The grooves are formed by hydrau-
lically advancing the groove roll into the pipe, which is
supported by the drive roll.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE!
Keep this manual with machine for use by the operator.
Roll Groover Safety
• Keep hands away from groove rolls. Do not wear
loose fitting gloves. Fingers can be crushed between
groove rolls, groove roll and pipe or between pipe and
stabilizer wheel.
• Keep hands away from ends of pipe. Do not reach
inside pipe. Do not touch groove while operating.
Burrs and sharp edges can catch and cut. Fingers can
be crushed between groove rolls or between groove
roll and pipe.
• Keep guards in place. Do not operate the roll
groover with the guard removed. Exposure to
groove rolls may result in entanglement and serious
injury.
• Properly adjust guard to reduce the risk of entan-
glement and serious injury.
• Only groove pipe 8" (200 mm) or longer. Grooving
shorter than specified pipe can result in entanglement
and crushing injuries.
• Do not wear loose clothing when operating ma-
chine. Keep sleeves and jackets buttoned. Do
not reach across the machine or pipe. Clothing
can be caught by the pipe or machine resulting in
entanglement.
• Do not use this roll groover with a power drive
or threading machine that does not have a foot
switch. Never block a foot switch in the ON po-
sition so it does not control the machine. A foot
switch provides better control by letting you shut
off the machine motor by removing your foot. If
entanglement should occur and power is maintained
to the motor, you will be pulled into the machine. This
machine has high torque and can cause clothing to
bind around your am or other body parts with enough
force to crush or break bones or cause striking or
other injuries.
• Be sure that the roll groover, pipe, stands and
machine are stable. Be sure the roll groover is
properly set up and secured. This will help prevent
tipping of the equipment and pipe. Properly support
the pipe. This will help to prevent the tipping of the
pipe and equipment.
• Properly prepare and handle pipe. Burrs and sharp
edges can catch and cut.
• One person must control the work process, ma-
Bekijk gratis de handleiding van RIDGID 918-5, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | RIDGID |
| Model | 918-5 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 42226 MB |
