RIDGID 918-5 handleiding
Handleiding
Je bekijkt pagina 23 van 111
21
918 Roll Groover
999-998-946.10_REV D
Service And Repair
WARNING
Improper service or repair can make machine
unsafe to operate.
The Maintenance Instructions will take care of most of
the service needs of this machine. Any problems not
ad dressed by this section should only be handled by an
authorized RIDGID service technician.
Tool should be taken to a RIDGID Authorized Indepen-
dent Service Center or returned to the factory. Only use
RIDGID service Parts.
For information on your nearest RIDGID Authorized Inde-
pendent Service Center or any service or repair ques-
tions, see Contact Information section in this manual.
Optional Equipment
WARNING
To reduce the risk of serious injury, only use ac-
cessories specically designed and recommended
for use with the RIDGID 918 Roll Groover, such as
those listed.
For a complete listing of RIDGID equipment avail-
able for these tools, see the Ridge Tool Catalog
online at RIDGID.com or see Contact Information.
Disposal
Parts of the 918 Roll Groover contain valuable materials
and can be recycled. There are companies that specialize
in recycling that may be found locally. Dispose of the
components and any waste oil in compliance with
all applicable regulations. Contact your local waste
management authority for more information.
For EU Countries: Do not dispose of electri-
cal equipment with household waste!
According to the European Guideline 2012/
19/EU for Waste Electrical and Electronic
Equipment and its implementation into na-
tional legislation, electrical equipment that
is no longer usable must be collected separately and
disposed of in an environmentally correct manner.
PROBLEM POSSIBLE REASONS SOLUTION
Pump not delivering
oil, cylinder does not
advance.
Pump release valve open. Close release valve.
Low oil in reservoir. Check oil level per instructions.
Dirt in pump body. Have serviced by qualified technician.
Seats worn or not seating Have serviced by qualified technician.
Too much oil in reservoir. Check oil level per instructions.
Pump handle
operates with
“spongy” action
Air trapped in system. Bleed air from hydraulic system per instructions.
Too much oil in reservoir. Check oil level per instructions.
Cylinder extends only
partially.
Pump reservoir is low on oil. Fill and bleed system.
Depth adjustment set incorrectly. Follow depth adjustment instructions.
Mounting Kits
Catalog
No.
Description
48405
Roll Set for 8-12" Sch 10 (8" Sch 40) with Carry
Case
48407 Roll Set for 1¼"-1½" Sch 10/40 with Carry Case
48412
Roll Set for 1" Sch 10/40 and 1¼"-1½" Sch 10/40
with Carry Case
48417 Roll Set for 2"-6" Copper
59992 2½"-12" Stabilizer
76822 Inch Diameter Tape
76827 Metric Diameter Tape
49662 Toolbox
51432 Drive Roll 2" - 6"
Catalog
No.
Model
No.
Description
48292 911 300 Power Drive Mount Kit Only
48397 914 1224 Carriage Mount Kit Only
48402 915 535 Carriage Mount Kit Only
56607 917
1233/300 Compact Carriage Mount Kit
Only
56532 — Stand, Pipe Leg For 1233/300 Compact
Catalog
No.
Description
49217 Groove Roll 2" - 6"
54317 Box Wrench
42360 1206 Stand
Bekijk gratis de handleiding van RIDGID 918-5, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | RIDGID |
| Model | 918-5 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 42226 MB |
