Rheem 876A26PF handleiding
Handleiding
Je bekijkt pagina 10 van 48
10
ABOUT YOUR WATER HEATER
WATER HEATER APPLICATION
This water heater is designed for use in a single family domestic dwelling for the purpose of heating potable
water. Its use in an application other than this may shorten its life.
MODEL TYPE
The Rheem
®
continuous flow gas water heater model you have chosen
is for outdoor installation only.
The water heater has a maximum preset outlet temperature setting of:
• 874 series 75°C
• 876 series 50°C
Note: The 876 series water heater is marked “THIS APPLIANCE
DELIVERS WATER NOT EXCEEDING 50°C IN ACCORDANCE WITH
AS 3498” on the front panel.
• An 876 series model must not be installed as an in-series gas
booster to a solar water heater, as water temperature greater than
50°C can be delivered from the water heater contravening its
compliance to AS 3498.
WATER HEATER OPERATION
The water heater operates automatically, heating water as it passes through the water heater. When a hot tap
is opened, the gas burners ignite to provide immediate heating of the water. The heat produced by the burner
is transferred to the water through the heat exchanger. The water is heated to a constant temperature by the
automatic adjustment of the gas supply to the burner to suit the water flow rate. The gas burners extinguish
when the hot tap is closed.
Automatic safety controls are fitted to the water heater to provide safe and efficient operation.
USER TEMPERATURE CONTROL
Temperature Controllers
The Rheem 874 and 876 series may be installed with one or more user adjustable Standard temperature
controllers, which allow you to choose the most suitable water temperature of the delivered water from the
outlet of the water heater for your hot water needs. They are the Kitchen controller, Bathroom 1 controller and
the Bathroom 2 controller.
Temperature controllers are only suitable for single water heater installations. They are not suitable if multiple
water heaters are manifolded together. Other manufacturers’ controllers are not suitable to and cannot be
installed with this water heater.
Warning: Temperature controllers must not be fitted to this water heater (874 series) if it is installed as an
in-series gas booster with a solar water heater system because water at a temperature much higher than the
controller setting can be delivered. If a solar water heater is installed to an existing water heater installation,
then all controllers must be disconnected and removed.
Refer to the Rheem website for the Owner’s Guide and Installation Instructions for the Standard Rheem
Controllers. Visit – www.rheem.com.au/rheem/help#guides.
Bekijk gratis de handleiding van Rheem 876A26PF, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Rheem |
| Model | 876A26PF |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7567 MB |