RGBlink MSP 405 handleiding
Handleiding
Je bekijkt pagina 12 van 19
MSP 405 User Manual
11
Check the HDMI output signal on the HDMI monitor. Ensure the HDMI display is powered on and
set to the correct input. If the signal is not displayed, replace the HDMI cable, reboot the device if
needed and switch the mode to Mode 12 for troubleshooting.
2.2 Application Example 2
If you need to convert HDMI Input to Fiber and SDI Output, as well as Fiber Input to HDMI
Output, follow steps blow:
1. Set MSP 405 Device 1 to HDMI Input to Fiber and SDI Output mode.
2. Use an HDMI cable to connect the HDMI output port of a device (e.g., a PC) to the HDMI input
port of MSP 405 Device 1.
3. Use an SDI cable to connect the SDI output port (SDI input and SDI output share the same port)
of MSP 405 Device 1 to the SDI input port of the SDI monitor.
4. Set MSP 405 Device 2 to Fiber Input to HDMI Output mode.
5. Use a fiber optic cable to connect MSP 405 Device 1 and MSP 405 Device 2.
6. Connect the HDMI output port of the MSP 405 Device 2, which receives fiber signal, to your
terminal display so as to enable conversion between fiber and HDMI signals.
Bekijk gratis de handleiding van RGBlink MSP 405, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | RGBlink |
| Model | MSP 405 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3668 MB |
