RGBlink MSP 405 handleiding
Handleiding
Je bekijkt pagina 10 van 19
MSP 405 User Manual
9
Chapter 2 Use Your Product
MSP 405, a device that functions as both a transmitter and receiver. Designed for flexibility, it
supports signal transmission cross various interfaces: SDI to HDMI + optical fiber, HDMI to SDI +
optical fiber, and optical fiber to SDI + HDMI when paired with another MSP 405 unit.
2.1 Application Example 1
If you need to convert SDI Input to HDMI Output with a resolution of 1920x1080P@60Hz, select
Mode 3 on the MSP 405.
Required components are listed as follows:
▄ Power Adapter: Provides power to the device with a voltage of DC 12V and a maximum
current of no less than 1.5A.
▄ MSP 405: Device for format conversion between SDI and HDMI signals.
▄ HDMI Monitor: Ensure the HDMI cable and monitor are working properly.
▄ SDI Signal Source: Provides SDI signal.
▄ PC: Used for outputing HDMI signal and configure the resolution.
▄ SDI Monitor: Verify the SDI cable and SDI signal source are working properly.
▄ SDI Cable: Connects the SDI signal source to the MSP 405 and the SDI signal source to the SDI
monitor.
▄ HDMI Cable: Connects the PC to the MSP 405 and the PC to the HDMI monitor.
Then follow steps below for connection:
1. Check the Devices
Bekijk gratis de handleiding van RGBlink MSP 405, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | RGBlink |
| Model | MSP 405 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3668 MB |
