REMKO SKC 150 handleiding

28 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 14 van 28
5 Operation
The unit is operated via the control panel located
on the unit. The display shows operating parame-
ters such as the current operating mode, the set
temperature and fan speed, as well as the status
of the additional functions.
Keys on the control panel
Swing
3S-Timer
3S-Wifi
2 1
4
3
5
Fig. 4: Keys on the control panel
1
Key "I/0" (On/Off)
This key switches the unit on or off.
2
"MODE" operating mode key
Pressing this key switches between the operating
modes cooling (COOL), recirculation (FAN) and
dehumidification (DRY).
The key is also used to activate and deactivate the
switch-on and switch-off delay.
3
"FAN" speed key
With this key it is possible to set the fan speed and
therefore the air flow. It is possible to select
between the speed stages low (LO), medium
(MED) and high (HI). The LEDs show the selected
fan speed.
4
"SLEEP" night mode key
Pressing this key activates night mode. When night
mode is activated, the unit goes into low-noise
operation and cooling is deactivated. The fan of
the indoor unit continues to run at reduced speed
and the display dims after 10 seconds.
5
"-/+" keys for setpoint adjustment
This key is used to set the temperature setpoint in
1 °C increments. The adjustment range for the
target temperature is between +16 °C and +30 °C.
The keys are also used to set the switch-on and
switch-off delay.
Indicators on the LCD control panel
8
6
7
9
10 11
Fig. 5: Indicators on the LCD control panel
6
"SLEEP" night mode LED
Lights up when night mode is activated.
7
"WIFI" LED
Not used
8
Segment display
The segment display shows the temperature set-
point set during operation. When setting the
switch-on or switch-off delay, the segment display
shows the time.
9
"MODE" operating mode LED
Indicates the active operating mode.
Cooling (COOL)
Recirculation (FAN)
Dehumidification (DRY)
10
"FAN SPEED" LED for fan speed
Displays the set fan speed.
LOW
HIGH
11
"TIMER" LED
Displayed when the switch-on or switch-off delay is
active.
REMKO SKC series
14

Bekijk gratis de handleiding van REMKO SKC 150, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkREMKO
ModelSKC 150
CategorieAirco
TaalNederlands
Grootte3268 MB