Handleiding
Je bekijkt pagina 13 van 28
4 Design and function
Unit description
The mobile split air conditioner is designed exclu-
sively for use in the caravanning sector (e.g. in
camper vans, caravans or similar mobile homes)
and consists of an indoor unit for installation in the
window area and a permanently connected out-
door unit. The refrigeration circuit is hermetically
sealed. The indoor unit and the outdoor unit are
fixed to the window with a mounting device sup-
plied.
In cooling mode, the thermal energy contained in
the room air is absorbed via the evaporator (heat
exchanger) and transferred to the refrigerant. This
transfers the thermal energy to the outside air via
the condenser (heat exchanger) located in the out-
door unit. In cooling and dehumidification mode,
the condensate water is transported from the
indoor unit to the outdoor unit by means of a pump.
There, the water runs over the warm condenser
and evaporates. The unit filters and dehumidifies
the room air and can also operate in recirculation
mode only if required. It is operated by the
touchscreen interface on the indoor unit.
Swing
3S-Timer
3S-Wifi
A
B
C
D
2
1
4
3
Fig. 3: Unit construction
1: Operating panel
2: Indoor unit emergency drainage
3: Connecting line
4: Outdoor unit transport handle
A: Indoor unit air outlet
B: Indoor unit air intake
C: Outdoor unit air outlet
D: Air intake outdoor unit
13
Bekijk gratis de handleiding van REMKO SKC 150, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | REMKO |
| Model | SKC 150 |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 3268 MB |
