Handleiding
Je bekijkt pagina 25 van 32
9 Care and maintenance
Regular care and observation of some basic points
will ensure trouble-free operation and a long
service life.
DANGER!
Prior to performing any work, ensure the equip-
ment is disconnected from the voltage supply
and secured to prevent accidental switch-on!
1
Fig. 16: Filter removal
1: Recirculated air filter
n Clean the unit using a damp cloth. Do not use
a jet of water
.
n Do not use any caustic, abrasive or solvent-
based cleaning products.
n Only use suitable cleaning agents, even in the
event of severe soiling.
n Ensure that no moisture gets into the unit.
Clean the exhaust air and outlet openings reg-
ularly and thoroughly
. This is where dirt most
often collects first
NOTICE!
Check the level of dirt on the on the exchanger
fins.
n Clean the air filter on the indoor unit at regular
intervals, and more frequently if necessary
.
n It is recommended that you take out a mainte-
nance contract with an appropriate specialist
firm.
This enables you to ensure the operational reli-
ability of the plant at all times!
Filter cleaning
The unit is equipped with an air filter. This can be
withdrawn from the rear of the unit. The filters must
be cleaned at regular intervals. Clean the air filters
at intervals of no more than 100 operating hours.
Reduce this interval in the case of heavily contami-
nated air
.
Please proceed as follows in order to clean the
unit:
1. Switch the unit of
f and pull out the power
plug.
2. Pull the filter out of the unit (Fig. 16).
3. Clean the dust of
f the filter. Use a vacuum
cleaner in the event of slight soiling.
4. In the case of heavy soiling clean the filter
carefully in lukewarm water
.
5. Then allow the filter to dry in the air
.
6. Insert the filter back into the unit.
7. Ensure that the filter is dry and undamaged.
NOTICE!
Never operate the indoor unit without the orig-
inal filter
. The heat exchanger fins on the indoor
unit with soil up if operated without a filter and
the device will suffer performance loss.
Maintenance by specialist personnel
n Maintenance and repair work must only be car-
ried out by trained and certified specialist per-
sonnel.
n Ensure that the specialist personnel are certi-
fied to work with flammable refrigerants (e.g.
R290).
n Use only original spare parts from the manu-
facturer to ensure the safety of the unit.
25
Bekijk gratis de handleiding van REMKO RKL 355 Eco, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | REMKO |
| Model | RKL 355 Eco |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 4089 MB |
