Reflexion SB240 handleiding
Handleiding
Je bekijkt pagina 19 van 23
19
BASIC OPERATION
Automatic switch off
The unit has a power saving function according to the European ErP standard, which makes the unit
switch to standby mode after 15 minutes without an audio signal in Bluetooth, AUX-In and USB mode.
Press and hold the play/pause button for approx. 3 seconds to switch the unit back on.
Please note that a low volume setting of the audio source can be detected as "no audio signal". This
may affect the unit's signal detection capability and also trigger an automatic switch to standby mode. In
this case, please reactivate the audio signal transmission or increase the volume setting of the audio
source to resume playback.
Playback buttons
You control the playback and volume for Bluetooth, USB and micro SD card mode with the following buttons.
Play / pause button (short press)
Play / Pause
Volume(+) key (long key press)
Next title
Volume(-) key (long keystroke)
Previous title
Volume(+) key (short keystroke)
Adjust volume (+)
Volume(-) key (short keystroke)
Adjust volume (-)
BLUETOOTH MODE
Connect a device wirelessly via Bluetooth to the soundbar to play music from your external device on the
soundbar. Only Bluetooth is received and not transmitted. No devices such as external Bluetooth speakers or
Bluetooth headphones can be connected to the soundbar for external playback. Follow the steps below to
start Bluetooth playback. Smartphones and other external devices are not included.
1. Switch on the soundbar.
2. Select the Bluetooth mode with the Mode button.
3. The soundbar will automatically pair with the last connected Bluetooth device when it is in range.
4. The connection status is indicated by the status LED.
Connected: The status indicator lights up blue.
Not connected: The status indicator flashes blue.
5. If the soundbar is paired with an external Bluetooth device for the first time, start the search for
available Bluetooth devices on your external Bluetooth device, e.g. a smartphone.
6. Select the soundbar device from the list of found Bluetooth devices.
7. The connection is now established. If the two devices are paired, this is announced by a "Connected"
announcement and the status LED lights up blue.
8. You control the playback and volume on your external device or the soundbar.
9. You can control playback with the buttons as described above under the item "Playback buttons".
10. To end the Bluetooth connection Disconnect the devices on your external device.
Notes:
Bluetooth works best within 10 metres and outdoors without obstructions.
If the basic volume on your external device is set too low, you may not be able to hear any sound
from the soundbar. In this case, increase the volume on your external device.
UK
Bekijk gratis de handleiding van Reflexion SB240, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Reflexion |
| Model | SB240 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3544 MB |
