Reflexion SB240 handleiding
Handleiding
Je bekijkt pagina 18 van 23
18
BASIC OPERATION
This unit has an integrated 2200mAh lithium battery. To charge the battery or use the unit, use a power
adapter for the power supply. The power adapter must comply with the specifications (DC 5V / 1A) of the
soundbar. For example, you can use a mobile phone charging adapter as a power adapter. The power adapter
is not included in the scope of delivery.
Battery charging
This unit uses a rechargeable lithium battery (battery capacity 2200mAh). Fully charge the unit (approx. 4-5
hours) before using it for the first time. The playback time with a fully charged battery is approx. 5 hours
depending on the volume level set.
1. Plug the power cable into the mains socket and into the AC socket on the back of the unit.
2. The charging indicator shows the current battery status during charging.
The battery is being charged: The charging indicator lights up red during charging.
Battery low: When the battery is almost empty, a "battery low" announcement sounds. Please
connect the unit to a DC 5V power source for charging.
Battery fully charged: When the battery is fully charged, the status indicator no longer lights up red.
Unplug the power cable to switch the unit to battery mode.
Note:
Do not replace the battery yourself, this operation may only be carried out by qualified personnel.
Switch on / Switch off / Standby
1. To switch on the unit, set the power slider on the back of the unit to "On".
2. To switch off the unit, set the power slider on the back of the unit to "Off".
3. The unit switches in bluetooth, AUX-IN and USB mode to standby after 15 minutes if there is no audio
playback.
4. To switch the unit on again from standby mode, press and hold the play/pause button for approx. 3
seconds.
5. To switch the unit from the switched-on state to standby mode, also press and hold the play/pause
button for approx. 3 seconds.
Note:
When the unit is switched on, it starts with the last active mode and the last volume setting.
The standby function is not available in coaxial mode.
Select mode
1. Press the Mode button repeatedly to switch to the corresponding mode.
2. The mode is announced by a voice.
3. If no other device or source is connected to the soundbar, only Bluetooth mode is available.
4. When one of the following sources is connected to the soundbar, the unit automatically switches to the
corresponding mode: Micro SD, USB, AUX-IN.
5. The following modes are available: BT mode (Bluetooth), TF Card Mode (Micro SD Card), USB mode
(USB), AUX mode (AUX-IN) and Coaxial Mode (Coax Digital Audio Input)
Set volume
1. To set the desired volume, press the Volume (-) button or Volume (+) button.
2. When the maximum audio setting of the Soundbar is reached, a beep sounds.
UK
Bekijk gratis de handleiding van Reflexion SB240, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Reflexion |
| Model | SB240 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3544 MB |
