RaySafe X2 handleiding
Handleiding
Je bekijkt pagina 37 van 51
RaySafe X2 – LIGHT
Tip! Tap a parameter to get large digits and parameter information. Switch between these by
swiping sideways.
Zero adjust: If prompted to make a zero adjust, select zero adjust (0) on the sensor wheel. The
zero adjust will take approximately 10 s.
Note! Store the sensor with the sensor wheel in a closed position (0 or illuminance), to prevent
dust in the optics.
LIGHT SENSOR: MEASUREMENT PARAMETER DEFINITIONS
Illuminance is the amount of light incident on a surface.
Luminance is the amount of light emitted from a surface.
LIGHT SENSOR: SPECIFICATIONS
Dimensions: 48 × 60 × 68 mm (1.9 × 2.4 × 2.7 in)
Weight: 136 g (4.8 oz)
Storage temperature: -25 – +70
°
C (-13 – +158
°
F)
Storage humidity: Non-condensing
Operating temperature: 15 – 35
°
C (59 – 95
°
F)
Operating atmospheric
pressure:
70 – 110 kPa
Operating humidity: < 80 % relative humidity, non-condensing
SETTING: UNITS
Select between
cd/m
2
and lux, or
fL and fc
1 cd/m
2
= 0.2919 fL (luminance)
1 lux = 0.09290 fc (illuminance)
36
Bekijk gratis de handleiding van RaySafe X2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | RaySafe |
| Model | X2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6337 MB |
