Rane Zonetech handleiding

28 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 8 van 28
8
PEQ Frequency (PEQ Freq)
This is the center frequency of the mid-
range parametric equalization band: 40 Hz
16 kHz (default: 630 Hz).
PEQ Bandwidth (PEQ Band)
This is the width of the mid-range
parametric equalization band: 0.300
4.000 oct (octaves) (default: 0.500 oct).
High Shelf Level (HS Level)
This is the amount of “boost” (increase) or
“cut” (decrease) of the high-frequency
shelving filter: -15.0 to +8.0 dB.
High Shelf Frequency (HS Freq)
This is the center frequency of the high-
frequency shelving filter: 630 Hz 16 kHz
(default: 630 Hz).
Tip: Lower values allow you to boost
treble frequencies more but increases the
risk of overdriving the tweeters.
Input Type (Type) (Inputs 5 and 6 only)
This is the type of device connected to Input
5 and Input 6: Dynamic (microphone),
Condenser (microphone), Unbalanced
Line+, Balanced Line (default: Balanced
Line).
Note: Phantom power is enabled only
when Condenser is selected.
Tip: Unbalanced Line+ sums two
unbalanced signals (such as left and right
RCA lines) when one is connected to the
positive (+) input and one is connected to
the negative (-) input.
Tip: Balanced Line is a typical fully
balanced line-level input (e.g., TRS or XLR)
as used with commercial audio equipment.
Stream Source (Source)
This is the source from which Zonetech
will play streamed audio: None (off),
Bluetooth, AirPlay, UPnP/DLNA.

Bekijk gratis de handleiding van Rane Zonetech, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkRane
ModelZonetech
CategorieNiet gecategoriseerd
TaalNederlands
Grootte2241 MB