Rane Zonetech handleiding
Handleiding
Je bekijkt pagina 7 van 28
7
Operation
Editing Input Settings
You can use Zonetech’s display, Info knob, and Left/Right (/) buttons to edit the settings
of each input.
To select an input to edit, press the corresponding Input button (1–6) or the Stream
button. The display will indicate which input is selected: Input 1–6 or Stream.
To show the previous or next setting for the selected input, use the Left/Right (/)
buttons (respectively). Turn the Info knob to adjust the value of each setting.
Note: To control the input settings remotely, you can also use a web-based interface
on your computer (connected to the Computer Ethernet port), or up to two Rane DR6
master remote controls (connected to the Master Remote and Pager port).
These are the editable input settings. The abbreviated name (shown when the setting is not
selected) is in parentheses.
Input Level (Level)
This is the volume level at the input stage:
-88.0 to +12.0 dB.
Tip: If you are unsure of what this level
should be, it is better to use a lower setting
to allow for headroom and to prevent
clipping/distortion.
Low Shelf Level (LS Level)
This is the amount of “boost” (increase) or
“cut” (decrease) of the low-frequency
shelving filter: -15.0 to +8.0 dB.
Low Shelf Frequency (LS Freq)
This is the center frequency of the low-
frequency shelving filter: 40–630 Hz
(default: 630 Hz).
Tip: Higher values allow you to boost bass
frequencies more but also require more
amplifier power.
PEQ Level
This is the amount of “boost” (increase) or
“cut” (decrease) of the mid-range
parametric equalization band: -15.0 to +8.0
dB.
Bekijk gratis de handleiding van Rane Zonetech, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Rane |
| Model | Zonetech |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2241 MB |
