Rane ECM 64 handleiding
Handleiding
Je bekijkt pagina 22 van 26
Manual-22
STATUS consist of 20 bytes returned in this order:
Byte Parameter Value
1 OPSTAT See OPSTAT
2 Preset Memory 1 - 16
3 Working/Stored Flag 1/0 (See Note 6)
4 Working/Dirty Flag 1/0 (See Note 7)
5 Meter Display 0 - 7, 0 = Mic Mix, 1 = Line In, 2 = Aux in, 3 = Hybrid Rx, 4 = Out 1, 5 = Out 2, 6 = Out 3,
7 = Hybrid Tx.
6 Meter Level -45 to +9 dB
7 Off Hook Flag 1/0, 1 = Off Hook
8 New Ring Flag 1/0, 1= Ring detected - Cleared when read
9 Privacy Flag 1/0, 1 = Privacy On
10 Mute Flag 1/0, 1 = Mute On
11 Suppression Flag 1/0, 1 = Suppression active
12 AEC Installed Firmware Rev or 0 if not installed
13 Hybrid Installed Firmware Rev or 0 if not installed
14 DTMF Number (Char) Set to 0 after read.
15 Prog. Out Level 0 - 118 Value for SPL 34
16 - 20 Reserved 0, Not used
Flash COM LEDs on all units (00 hex):
Transmit $FB 00 $FB 00
Transmit $00 $02 (where $02 = number of data bytes to follow including checksum)
Transmit $00 (command code)
Transmit $FE (checksum)
Get Data From Channel (01 hex):
Transmit ADDR header ($FB XX $FB XX, where XX = ADDR) (See Note 9)
Get DT
Get ID
Transmit $00 $08 (where $08 = number of data bytes to follow including checksum)
Transmit $01 (command code)
Transmit $00 (CHNUM)
Transmit MEMNUM
Transmit 2 bytes; the starting SPL param byte index (See Note 5)
Transmit 2 bytes; the number of SPL param bytes (See Note 5)
Transmit Checksum
Get COMSTAT
Get Device Type and Manufacture’s Identification Codes (02 hex):
Transmit ADDR header ($FB XX $FB XX, where XX = ADDR) (See Note 9)
Get DT
Get ID
Transmit $00 $02 (where $02 = number of data bytes to follow including checksum)
Transmit $02 (command code)
Transmit $FC (checksum)
Get COMSTAT
Get Globals (03 hex):
Transmit ADDR header ($FB XX $FB XX, where XX = ADDR) (See Note 9)
Get DT
Get ID
Transmit $00 $02 (where $02 = number of data bytes to follow including checksum)
Transmit $03 (command code)
Transmit $FB $FB (checksum, See Note 1)
Get Global Parameters
Get Checksum
Get COMSTAT
Bekijk gratis de handleiding van Rane ECM 64, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Rane |
| Model | ECM 64 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3260 MB |
